You may also want to check for a crack or pin hole in the gas line. There is a restriction of fuel flow to the carburetor. When you continue pushing the primer button, you are "forcing" the fuel through the restriction. The first thing to check is for a clogged fuel filter. The next steps would involve the carburetor settings and the throttle linkage.
Instead of just pushing the camera button, you have to hold it down. You will record up to ten seconds of video, unless you release the button before that.
1. Select "oil life" with the display button, by pushing in till it comes up. 2. Push the button again and hold 10 seconds. 3. Let off the button and push again and hold for 5 seconds. Indicator should return to 100%.
the question with the button that ends the game? wait about 5-10 seconds and the button changes and says something like "click this to continue to the next question"
With your ignition in the on position, but the car not started. Press and hold the disp button on the radio for about 5 seconds. On the radio the word settings will appear at which point you can scroll through the setting by pushing the next or prev buttons. When you get to tire pressure you can reset it by pushing the disp button.
Hold the down button until the window stops moving. Continue holding it for about three seconds until you hear a click. Hold the up button until the window stops moving and continue holding it for another three seconds until you hear another click. That's it. You're done. Repeat for the other window if necessary.
Threre is a button just a little below the 'shift' button on the gearshift. Pushing this button in will turn off o/d. Threre is a button just a little below the 'shift' button on the gearshift. Pushing this button in will turn off o/d.
Pushing the button!!
AnswerTry on the remote, UNLOCK + LOCK + LOCK. That should do it. After the car starts, just UNLOCK + UNLOCK to unlock all doors. Once you get in (without pressing pedals), just put key in and TURN to ON. Do not turn to START or you will attempt to start an already running engine. Not all Scion tC's come with this feature though. You may need to have andafter-market one installed.orThe remote engine starter is operated by pushing the `lock` button on the keyless entry fob in a quick, three-step sequence: (1) push and release `lock` button; (2) push and release `lock` button again; (3) then push and hold `lock` button for three seconds-and the engine starts. The engine can also be stopped remotely by pushing the `unlock` button once, or by pushing and holding the lock button for two seconds or more.
When mine did that, I tried pushing on it a bit and pressing on it while pushing the button.
Pushing the power button on the computer
by pushing the button
by pushing the button