answersLogoWhite

0


Best Answer

cari diri r. aku pun selok ugop ni

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does the no-load characteristic differ for increasing and decreasing excitation current in dc generator?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

If the excitation of generator changes what happens to the terminal voltage?

By Decreasing the excitation voltage the terminal voltage will decrease and similarly by increasing the excitation voltages the terminal voltage will also increases.


What is the excitation system in a generator used for?

The excitation system is used to control the excitation of the rotating field in the armature. By increasing the armature current, it in turn increases the magnetic flux in the armature coil. This has the effect of increasing the voltage output of the generator. By lowering the armature current this in turn lowers the generator output voltage. The generator's voltage regulator automatically adjusts the output voltage continuously as the applied load on the generator changes.


What happens if excitation fails in parallel oprating generator?

when excitation fails,Reactive power will be supplied by the system to which the generator is connected and generator will work as induction generator and its speed will rise a little. generator which was in over excitation mode will work in underexcitation.but there is under excitation limit which should not be reached so we should detect loss of excitation and trip generator


Generator excitation voltage?

the voltage which is given for creating magnetic field in a generator is known as excitation voltage.


What are different methods of excitation of dc generator?

when the current is passing through the winding then it is called "Excitation". Types of excitation (1)seperately excited generator. (2)self excited generator. self generator is classified into 3 types. 1.shunt generator. 2.series generator. 3.compound generator. compoud generator is again classified into 2 types. 1.short shunt generator. 2.long shunt generator.


What is the difference between generator over excitation versus under excitation when attached to the grid?

Over Excitation is a condition when the Excitation System is providing too much field current and as a result, the rotor of the generator will over heat. The Excitation System is equipped with an Over Excitation Limiter. This limiter acts to reduce the Excitation Current if this condition exists Underexcitation is a condition when the generator is not getting enough Excitation Current. If the generator does not get enough Excitation Current, it can be un-synchronized with the grid. We call this slipping a pole. If this occurs, the generator can be severely damaged. Kelly Thompson Engineering Lead Siemens Energy Alpharetta GA


What is the basic principle of Generator excitation?

The basic principle of generator excitation is that once the gasket of tie generator is being checked, the generator excits as if the block is not inserted. By egbebu emmanuel


What is excitation in generator and 2 methods each?

when the current is passing through the winding then it is called "Excitation". Types of excitation (1)seperately excited generator. (2)self excited generator. self generator is classified into 3 types. 1.shunt generator. 2.series generator. 3.compound generator. compoud generator is again classified into 2 types. 1.short shunt generator. 2.long shunt generator.


What is a brush less generator?

It is self excited generator, no external excitation circuit.


What voltage is generally used for field excitation?

For a small generator like the 125 Watt Alternator/Generator in your car, 12 Volts at a couple Amps. For a large 1,200,000,000 Power Plant Generator typical excitation is 600V at 8000A.


How variable speed generator works and its specification?

First you have to understand how a generator works. Basically the excitation voltage is what varies according to generator output. Usually on a power source that has a inconsistant rpm, the excitation voltage will vary similar to a govenor in order to hold the generator output constant.


What is meant by regulation or an alternator?

Regulation of an alternator is varying or adjusting the d.c. current flow (excitation current) in the revolving field coil to control the output voltage. When an alternator is subject to varying load conditions, and therefore changing load resistance at the output, the output voltage will vary in response. When output voltage is reduced in response to increased load (reduced output resistance), the "voltage regulator" will respond by increasing the excitation current to increase the voltage output. If load is reduced, the generator will momentarily become over-excited and the ouput voltage will increase. The voltage regulator responds by decreasing excitation current, returning the generator output voltage to its nominal level.