0
Why does the overdive relay switch light stays on when the over drive is working on a 240 dl?
Wiki User
∙ 15y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
On a 1996 Nissan Altima what does it mean when the over drive light flashes?
There is aproblem with either the transmission or the overdive unit.
Ford galaxy auto will not go into drive?
Possibly a problem with the brake light switch It is linked to the gear selector If the switch is faulty you cannot select gears Make sure the brake lights are working
What is the working pressure of air in brake light switch in air-brake vehicles?
The brake light switch is not air actuated.
Why reverse light come on in drive?
It probably has something to do with the switch.
The Pilot light on but heater will not fire up?
the pilot light in my fireplace is working but when i turn the switch on (new switch) it wouldn't fire up
Can you still drive your car without a brake light switch?
Yes
If the highmount brake light is working but the brake lights are not working what is wrong?
It is the brake light switch. The 3rd light has a different switch. GoodluckJoe you can check under neith the bed for fire where they come together. if ther is fire it is the circuit board where your lights go. if there is no fire then its gonna be in the turn signal switch
ETS light comes on when the switch located on the side autmatic shifter is pushed 1999 Sunfire 2.2?
It is supposed to. ETS (Enhanced Traction System) is turned on and off with that switch. Leave it on. The system is on and working when the light is off.It is supposed to. ETS (Enhanced Traction System) is turned on and off with that switch. Leave it on. The system is on and working when the light is off.
Honda Pilot drive light blinking?
Transmission Prssure Switch/Sensor -
Why are your Peugeot 206 brake lights not working?
probably the brake light switch on the pedal if none are working at all
Why does a 1993 Nissan short bed keep light on after shut off?
If you are referring to the can light, there is a manual switch on the light that allows it to operate when the doors is closed or to automatically turn on when the door is open and then shut off when the door is closed. If the switch is in this position and the light is staying on, the switch in the door to tell it to turn off is probably not working. If you are referring to the can light, there is a manual switch on the light that allows it to operate when the doors is closed or to automatically turn on when the door is open and then shut off when the door is closed. If the switch is in this position and the light is staying on, the switch in the door to tell it to turn off is probably not working.
Why does the light around the ignition switch of your Honda CR-V not working?
Bulb is blown out?
