If it happens after you put chlorine, check your water balance at your local store and make sure you are not using calcium hypochlorite as your chlorine shock.
well i have one thing to say ive never had to deal with milky pool water but i willsay try cleaning your pool or buying another pool..i don't know all the stuff i said im not shore try asking your parents..
my pool did get milky but cleared up after 48 hours
== ==
Probably not. Never seen it happen yet... Milky water may be chemical balance issue. Take a sample to be checked local pool store. Or, get a test kit.
If the swimming pool water is milky, it is advisable to have the level of stabiliser (cyanuric acid) tested. A level of over 80ppm in the pool water is likely to lead to "chlorine lock" which can turn the water milky. If the problem is the stabiliser, you will need to drain some of the swimming pool water and refill with fresh water to bring the stabiliser level down to 30-50ppm. To avoid the level getting out of control, use a non-stabilised chlorine product such as calcium hypochlorite. http://www.havuz.org/pool_blog/2004_01_01_pool-problems.htm
Some pool cleaning products are Surface Magic Water Surface Cleaner,Pool Perfect, Polaris pool cleaner,Chlor Brite Granular Chlorine, and Hayward Pool Vac XL.
Its possible it needs cleaning
what causes water hammer in pipe systems?
I too had milky water in my pool. I also have a chocolate lab dog who loves the water. I found that with allowing the dog to swim would turn the water milky and that a "slime" would develop on my filter and in my filter housing. I can't deny the dog but I can limit the number of swims. My pool is small so it's not hard for me to fix. I change the filter or clean it real well every day for a couple of days following one of her swims. I also heavily "shock" the water at the end of the day for 2 days after her swim. If the cause of you milky water is a 4 legged friend, this has worked for me.
Pool Daddy does offer weekly pool cleaning and pool maintenance in Tempe. Related links will show our Service Area page with map and our Tempe Pool Cleaning page.
Try hitting it with a clarifier, your pool shop will have it in stock. First hit it with an algaecide then cast a clarifier over the surface of the pool and let it rest without the pump going for at least a full 24 hours. At that time you will notice that the pool water is clear except a layer at the bottom, carefully vacuum this layer out to waste, do not put it through the filter
Sounds like something is going on with the water vs the liner. Drain the pool to the sewer using a hose to protect your yard.