0
Why does the temperature not work you change the sensor and the dash bore still not work?
Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you change the barrel of a pellet rifle from a rifled to a smooth barrel?
Yes it could be done, but you would have to locate a smooth bore barrel to change it with. Remember smooth bore barrels are not as accurate as a rifled bore barrel.
Where is the maf sensor on a 1996 Ford Contour?
IT should be in the air duct going to the throttle bore.
The forest still bore its burden of clamor?
personification
How does the size of capillary bore of a thermometer affect its accuracy?
As the temperature rises, the mercury expands into a narrow bore, because the volume of the mercury increases. If the bore is very narrow then the extra volume has to go a longer way up the bore to accomodate that volume, so it is more sensitive to small changes of temperature. And it is easier to spot small changes of temperature, and read them from the scale more accurately. But if the scale isn't marked accurately in the first place you are no better off.
How long to change a clutch in a Punto?
2 hours bore
I have cleaned my idle control sensor but still idles rough How can I clean the idle passage also The maf looks good and my tps was replaced and throttle bore cleaned?
try cleaning the egr valve passage and egr valve.
Do they still make the Remington 870 Express in 410 bore?
The 870 Wingmaster is still made in .410
Do you have to remove your choke from a smooth bore gun?
Not unless you have to change the choke tube.
Do all cars still run gm stock bore engine blocks?
No
How fast is a Yamaha qt50?
30 mph stock...40 if you change the exhaust and bore it out
How do you make a 125cc faster?
you can do all kinds of stuff. bore it out, change the sprockets, whatever.
Why is the bore smaller right above the bulb in a thermometer?
The narrower the bore the less liquid (mercury or alcohol) is required so the bulb containing the fluid will adjust more quickly to the temperature being measured. o.k well the narrower bore makes the liquid move slower up the thermometer so the accuracy is better ?????
