To form the magnetic field that rotates the motor. :)
wire
Electrical
Its a coiled tungsten filament.
An electromagnet can be made simply. When an electric current flows in a wire it creates a magnetic field around the wire. By winding the wire into a coil we can strengthen the magnetic field. Electromagnets are made from coils like this.
An electric motor
No. A coiled wire can never become an electric bell without some more piecesand parts. When you have those, however, assembled in the right way, it's truethat passing an electric current through the coiled wire will cause the bell to ring.
yes
An electromagnet is created by running electric current through a coiled conductive wire.
An electromagnet is created by running electric current through a coiled conductive wire.
Magnetic field.
Get a wire tester and start at the window motor. If it has electricity going to the motor, then the motor is burned out. No electricity, follow the wire to the switch (and so on).
A guitar pickup is wire coiled around a magnet. When the string vibrates, it causes the magnet to vibrate, which creates an electric current in the wire. The signal created by that electric current is then fed into the amplifier which converts it to sound.
# get these materials for a 3 x 3 foot shield : 4 metal bars(3 foot),a electric motor and 100 foot of electric wires. # cut a little piece out of the wire each inch. # put the 4 bars together. # put the wire and the bars together. # load up the motor and put it on the wire# put the motor on. # the motor explodes, that means you are stupid
Circuit
I suspect that it is because a coiled wire becomes an electro-magnet which disipates and uses energy, and is therefore not recognized as a short.
No, this will stop the magnet from functioning and is the same as using a short thick wire instead of a long coiled wire.
Start with the electric motor. Use a jumper wire on the positive wire of the motor and a hot wire. Does it work? If so, then you have to test the wiring harness back to the relay/fuse, the activation switch, and the battery. If the motor didn't work, then you need to replace the motor. If the motor works, but the top doesn't, then you need to check for broken cables or binding in the roof structure.