Want this question answered?
is there anyone who knows the answer?
the dash and radio lights are supposed to dim when the headlights come on. Make sure you have the brightness of the dash lights turned up as much as possible.
It is generally a small blue light that illuminates in the dash cluster notifying you that your high beam headlights are on.
First, check the fuse box and replace the fuse for the indicator lights. If the lights still do not work then replace the dash bulb itself.
It may be wired wrong.
The dash lights and the tail lights are on the same fuse. In all probability, you have a short circuit in the tail light wiring.
There'll be an indicator light on the dash which comes on when the high beam circuit is energized.
Rotate the headlight switch knob left or right with headlights turned on.
Check the fuses. There's usually a separate switch for the dash lights, which willmake them brighter or dimmer. It may be turned down too low. Check to make sure parking lights work as well, if they do not then could be the headlight switch as there was a recall on them.
the vehicle is equipped with daytime running lights a safety feature that most vehicles have not alot can be done unless you want to tear the drivers dash apart to take the sensor out that is located near the vin plate in the dash YOUR MOM
Should be the DRL (Daylight Running Light) indicator. Mandatory on Canadian spec passenger vehicles since 1988 and 1996ish for trucks. With the dash headlight switch off and the vehicle running, are the lights on? When you turn on the headlights does the indicator go out??
Headlight switch.