It could be a lot of things: broken belt in the tire, wheel bearing or ball joint bad, bent rim, tire out of alignment, tie rod broke, are only a few.
under the steering wheel
there is not one
Shakey Jake Harris was born on 1921-04-12.
turn wheel and key in the ignition at same time.
Only in the steering wheel I presume.
You need a special tool to remove steering wheels. It is a steering wheel puller. You can purchase one at your local auto parts store.
Nothing. Still the same motor (KA24DE). If you're looking for an S13 I suggest you get a 93 'cause if you plan to do an SR swap the power steering will line up on a 93.
Take horn apart, remove center nut & use a steering wheel puller (carefully, when they break loose, it can be fun)
you will need a special tool called a steering wheel puller. they are needed to compress the rings around the column and wheel and release it so you can remove the main nut.
Try going to "autoaccessories4less.com.
Neukin Says: 105-112 ft-lb for a manual trans.. flywheel to crank
1989-1990 240sx 1990-1997 Hard body 1990-1995 Pathfinder 1989-1995 Axxess 1990-1992 Stanza They are all the same engine.