Need to know what year 318 you have to help you.
Turn the key on but do not start the truck then slowly press the gas pedal to the floor 3 times
if it has a carburetor it is normal
start the engine and press the gas pedal while it is in park
put bike on stand turn key to on position press and hold brake pedal on floor bored press start button
Key on, engine off. (if push button start, press button twice without touching brake) press gas pedal to the floor three times.Key on, engine off. (if push button start, press button twice without touching brake) press gas pedal to the floor three times.
Turn key on, engine, off. Press gas pedal to the floor, 3 times within 10 secs. Start vehicle, and the oil light should be off.
To reset the light, turn your ignition to on, then press the gas pedal 3 times, then start the car. To reset the light, turn your ignition to on, then press the gas pedal 4 times then you will hear a beep, then start the car.
Many cars require you to press the gas pedal when starting the car. It's quite normal.
If you turn the ignition to the on position, and then press the interlock button, you don't have to press the clutch pedal down to start the truck.
On cars with a carburetor you must press on the gas pedal to activate the choke, cars with fuel injection do not have a choke so this is not necessary.
If u have the 24v then all you should need to do is press the gas pedal while turning it over may take two or three times for a few seconds.
IT wont start cause on most cars when you press the pedal down the injectors will not spray out any more fuel that's why if your car is flooded people say to push the pedal to the floor