it may be overheating, possibly due to a burnt out fan, or being pushed too hard, or there may be a bad connection
Headphone (minijack) cable to a minijack/RCA adapter (radioshack). The RCA end goes into the line in on your YHT system.
RCA is known for making the lowest-priced surround sound home theater systems. You can find a RCA home theater system with 5.1 surround sound for fewer than 90 dollars. Memorex, Philips, and Coby are also known to make affordable surround sound systems.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
If the speakers are not powered (they don't plug into the wall), you can cut off the RCA plug, strip back the wires to a negative and positive lead, and connect them to the speaker posts of the receiver.
The TV is a MONO TV and you need a STEREO TV with audio output jacks to get the surround system to work. PS, what is a spdif?
The TV set needs to have audio output connectors. If it has them connect the TV's outputs to RCA's inputs.
HDMI cables contain both the video and the audio signal, so you just plug it in and it should work.
from top right pin 1)left - 2)left+ 3)right - 4)right+ 5)center - 6)center+ 7) n/a 8) n/a 9) n/a 10)left surround - 11)left surround + 12)right surround - 13)right surround + 14)rca sub post 15)rca sub ring
No. You need to check the manual and rewire your connections properly.
Front Right speaker: RedFront Left speaker: WhiteCentre Channel: GreenLeft Surround (side): BlueRight Surround (side): GrayLeft Back Surround: BrownRight Back Surround: TanSub woofer Line-Level Output (RCA): PurpleNegative: black
I have System link 5 rca samsung remote transmitter whats the code?
i need to progra a rca system blink 4 remote to my westinghouse tv how do i do this