Your rotors are warped. You will need to have the rotors turned or replaced and new brake pads installed. Warped rotors are caused by over tightening the lug nuts or by excess heat from high speed stops or riding the brake pedal.
The vehicle probably has warped brake rotors, resurface or replacement of brake rotors is necessary to cure that condition..
it broke
Time for new brakes or adjustment.
Apply the brakes hard and steer out of danger.
Keep the car straight. Ease of gas, do not apply brakes. Let the car slow down until it is almost stopped . Right before your car stops pull of the road and apply brakes.
your car is probably trashy
The friction caused by the brakes causes the car to decelerate. This negative acceleration, in turn, causes a force to be applied to all those in the car. This is the lurch you feel.
we have to put the gear to neutral and apply brakes, and start the car.
vacuum leak 65 power brakes run off a vacuum, when you apply your brakes you stop the air leak. 65;
back up your car and apply the brakes, do this till there adjusted you will notice the difference on the brack pedal.
They stop your car. They are round discs that are kind of attached to the wheels and the pads grip the rotors when you apply the brakes to slow down the car. When a rotor becomes warped due to excessive heat, the steering wheel will shake when you apply the brakes.
The most likely cause is a warped rotor. It can also be other things so have you brakes and suspension inspected.
The brake discs or drums get hot when you apply the brakes and then the heat transfers out to the rims