Had the same prob. A lot of units 10 years or less have two separate heating strips when you first turn on the unit both are active once it reaches desired temp it alternates between the two to save on power. If one of these is bad it will blow cold when it cycles to it and warm back up when it switches to the other if it is still functioning. Hope this helps
Hot and cold are used as comparatives. Almost anything can be hot or cold depending on what you compare it to.
Heat can usually be considered as the energy of motion of atoms and molecules. Heat can flow spontaneously only from warm to cold. Heat can be made to go in the other direction, but only by doing work. So, the simple answer is: from warm to cold.
From cold to hot.
hot on the 19th od April
heat transfers to the coldest thing in the area. there for, there is no such thing as hot or cold because when something is cold all you really feel in the loss of heat from your hand to the cold object. same goes for hot. all you really feel is the large amounts of heat that hot object is giving you.
Could be low on coolant.
You can not get heat from cold water, The engine has to run long enough to get the water in the engine HOT. That is were you get heat from HOT WATER-- Coolent
The heater bypass valve is not fully closing, or leaking hot coolant into the heat exchanger.
A duct has come apart under the home?
What type of system do you have? Heat pump? With or without supplemental electric strip heat? Warm air furnace? Need to know in order to help.
if it's the outside unit, it will always be hot air. that's the air being pulled out of the house. cold air in, hot air out.
heat works in back not in front front blows hot for a few mins then cold
She was Sandra Brennan.
hot to cold is heat transfer
my vent doors are not working in my 92 camaro. the heat will blow hot or cold but only on def
your heat exchange actuator probably needs replaced.
heat dosent travel from cold objects to hot objects ,it only travels fron hot to cold objects