Check your gas cap. if it is not sealing properly, it will trigger a soft code. (meaning intermittent). It is an emissions code.
When the check gauges light comes on then that means you have either lost all oil pressure are the engine is running HOT. It only has 2 functions and these are it.
The check gauges light comes on when one of the gauges is out of its safe range. It could be the alternator over or under charging, oil pressure low, or the engine overheating.The check gauges light comes on when one of the gauges is out of its safe range. It could be the alternator over or under charging, oil pressure low, or the engine overheating.
No.
check the radio fuse (rdo) under the hood, it should be 15 amps
If a 1987 Chevy Suburban has lights and horn, but no ignition, gauges, radio, or interior lights it could be a ground wire problem. It is possible that there is a short somewhere. Also check the dome light for a possible water leak in the headliner.
When the check gauges light comes on it is telling you to check the gauges because at least one of the gauges is out of normal range. It could be low oil pressure, engine over heating or low voltage.
If the motor is the same the wiring harness should fit. Only thing I would check is the sending units. As long as both vehicles have gauges or both have warning lights all should be fine.
You can get gauges with instructions at auto parts stores Oil Pressure, engine temp, amps or volts
The check gauges light comes one when one of the gauges is not in the safe range. It could be an engine overheat, low oil pressure, or the alternator over/under charging.
for smooth running pressure guage needle otherwise we can't get perfect mesurement
nothing it dosent symbolize anything its just cool
My older Blazer has a 'check engine' light and also a 'check gauges' light. When the 'check gauges' light is on, check your other gauges like the temp and volt gauges. One of them may be showing something different than normal.