answersLogoWhite

0


Best Answer

Is the car overheating? As a safety measure, the fan will come on when the coolant sensor is unplugged. This is in case the wires come unplugged or the sensor goes bad so that the car will not overheat. If you have A/C the fan should come on within a few seconds after turning the A/C on. The fan on the car does not come on simply because it is plugged in to the sensor. It first has to get fairly hot....something like 238 degrees before the fan will come on. This is a how a correctly functioning fan will work. If it is not coming on when the gauge reads above that you may have to take it in to find out why. It could be a bad sensor....likely......or that the computer is not reading the signal correctly and thinks the car is running cooler than it is.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does your cooling fans not work when plugged in to the temp sensor but work when its unplugged from the temp sensor?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Cooling fans only comes on at 250 degrees if ac is on or when Coolant temp Sensor is unplugged. changed coolant temp relay still the same?

Might be the sensor, each fan has its own relay


Where is the location of cooling fan sensor that turns on the cooling fans - 1996 Corvette?

in the boot


Where is the location of cooling fan sensor that turns on the cooling fans - 2000 Corvette?

Where is the engine cooling fans sensor located on a 2000 Corvette ? Screwed in the driver side cyinder head just behind the Alternator. this is referred to as the temperature sensor. Hope this helps. Mike


Why in 1997 trans am V8 Cooling fans only comes on at 250 degrees or if ac is on or when Coolant temp Sensor is unplugged I changed coolant temp relay temp switch sensor but still the same?

I have a 96 ta and I made the fans on it manual so I can turn them on wen they need to be like wen I'm running it hard


Why wont your cooling fans on your 2002 grand am gt not working?

The cooling fans on a 2002 Grand Am GT might not be working because of a problem with a fuse. There is also a temperature sensor in the engine that tells the fans when to come on. This sensor may be bad.


Temperature gauge stays on cool and fans wont kick on enless unplugged from temp sensor its a 95 caprice classic?

ect sensor bad


How do I check 95 Monte Carlo cooling fans do not come on what do you need to check?

first you need to make sure both of your fans work by doing the following step 1- unplug your collant temp sensor and start your car, if the fans run, then replace coolant temp sensor, step 2- if the fans do not run check the relays that are located in the fuse box under the hood, their are 2 of them, step 3- if relays are good and the fans are not coming on while the coolant temp sensor wire is unplugged and the car is running then you fan motor needs to be replaced


1993 Pontiac grand am cooling fans don't come on?

Check the temperature sensor


Location of thermostat sensor to turn on engine cooling fans?

Most vehicles locate that sensor close to the thermostat housing.


1998 ply breeze 2.0l cooling fans will not come on they will work if hooked up to a computer?

replace the cooling temperature sensor


Your cooling fans run all the time when the engine is running.?

engine cooling fan should not do this - bad temp sensor likely


Does the coolant level sensor turn the fans on?

No, the electric cooling fans turn on and off by a signal from the coolant temp sensor. The coolant level sensor only illuminates the low coolant light when you are low on coolant.