answersLogoWhite

0


Best Answer

They could be stuck together if it's real old, or the blades aren't connected properly to the engine.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does your hedge trimmers motor runs but the blades do not move?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What makes the blades of a fan move?

The fan blades are turned by an electrical motor.


How do you fix 1992 Nissan pathfinder windshield wiper motor or blades not working?

motor is working but wiper blades do not move.


What are the parts of elecric fan?

You need, a electric motor, a power source (battery), blades or propeller to attactach tot he motor so when they spin the move (displace) the air.


How do you sharpen electric hedge trimmers?

I have been sharpening my electric hedge trimmer for the 32 years I've owned it. It sees a lot of use trimming many shrubs and a 125 foot long privet hedge.Use a die grinder or a Dremel-type rotary tool with a small diameter grinding wheel. I use a 1/4" wheel.Move the motor shaft using a small screwdriver through the ventilation slots and turn the fan. Rotate the motor until the blades are in a position where you can sharpen one edge of all blades. The trimmer can be held in a bench vise padded with a rag to make this a one-person job. Hold your grinding wheel to maintain the factory ground angle on the blades. If you sharpen your trimmer every few years, you don't need to grind very long to get the blade sharp. After you finish one side, rotate the motor shaft to move the blade to the opposite position and sharpen the other side of the teeth.


Why does grass move in the wind?

Grass blades being lighter move in the wind.


My wiper blades are not moving you can hear the motor but they don't move they move only about an inch when we physically move them in the middle of the windshield they will slam down and stop?

at the wiper linkage that is at the base of the wiper arms there is a retainer clip that has broken allowing the linkage from the motor to not move the arms. This happened to me on an 1989 ford pick-up once. It was a pretty easy fix once I figured out the right timing of the linkage.


How do you replace 1996 dodge Dakota wiper motor?

My windshield wiper just stopped moving, I can hear and feel the motor working but the blades dont move.? How do you get to it, looks like you have to remove the cowl and then maybe you can see if something is un-hooked or broke, anyone have a clue?


How does a air move?

a fan moves air with fan blades.


Does a 5-blade ceiling fan provide more air movement than a 3-blade fan?

This would generally depend on the size of the fan blades in question as well as the rating of the fan motor. 3 large blades can move as much air as four or five smaller blades. The question is similar to asking, is a big car faster than a small car.


Why fan rotating clockvise?

A fan motor rotates in the direction dictated by the type of blade it is using to move air in the desired direction. Both CW and CCW blades are used to do the same thing(move air in a particular direction). It simply depends on which type of blade one has in order to accomplish this and whichever blade you have will determine the direction of rotation of the motor driving it.


How do you move the blades at the mill in poptropica?

You have to jump on them and turn them counter clockwise.


How those a fan relate to friction?

The bearings in the fan blade assembly will be in contact with the electric motor that will be driving its motion. In addition, as the fan blades move, it will be met with air resistance, which correlates to the density of air - will also be put into consideration.