Want this question answered?
coke
If you already know how to shift an unsynchronized transmission, I'm guessing you learned on a 10 speed. The difference is... eliminate the first and sixth gear from a ten speed, and you have your nine speed shift pattern (as well the base shift pattern for the 8LL, 13 speed, and 18 speed). Schools teach you to take it out of gear at 1500 RPMs and drop it into the next gear at 1000 when upshifting, and they teach you to take it out of gear either at 1000 RPMs, take the engine up to 1500 RPMs, then drop it into the next lower gear when downshifting. Shifting at 1500 bogs down the engine... I upshift at 1900.
stock in first gear
Take it to get the gearbox replaced.
Shift into gear first.
WHY WON'T MY HONDA LX TAKE THE R GEAR BUT SOMETIMES IT WILL TAKE THE R GEAR
if its auto check the fluid, linkage, or take it to the shop and have em take it apart the tranny
In order to take off a gear knob in a Peugeot 206, you will need pliers. First, take off the gaiter housing. Turn it upside down. Cut/brake the zippy tie. Pull the old knob forcefully. The gear knob will come off.
Need to remove the rear end plate. Then count the teeth that is on the ring gear ( big gear ) and write it down. Now look up inside of the housing and you will see another smaller gear that runs in the big gear, That will be the pinion gear, count those teeth now. Now take this # and devide it into the first # you wrote down and this will be the gear ratio. You will have to jack it up and take it out of gear, so you can turn the gears to be able to count them.
If the car will go into second gear and take off, then there might be a bad syncro gear or bend shifter fork. The transmission may need to be taken out and inspected to find the problem.
Movies of that scale take 1.5 to 2 years. The CGI is what bogs them down.
because your car has problems...