If it is a stick, it could most likely be the clutch master cylinder or the slave cyliner. Check around the master for any leaks. Also, check the transmission itself and the clutch pedal in the cab. If there is fluid on them, that is probably your problem. Another thing could be the clutch pressure plate. If it is an automatic, check the Transmission Fluid and consider a transmission service.
will a gear shifter fork plate on 89 ford f150 work on 96 ford f150
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
my 2001 ford windstar wont shift out of first gear.
they are gear to gear driven.
Mine is 3:55
3.55
I have an 86 and it is. If first gear is not really low, it probably is.
The gear box ( manual transmission ) is bolted to the rear of the engine
Throttle position sensor mine was unplugged and caused that.
could be a worn pinion gear or bad U joint or both
I am not positive about this but, I believe that this indicates that the axle has a 3.00:1 gear ratio. Check with you local Ford dealer for a definitive answer.
It tells the transmission what gear it is in