0
What else can I help you with?
What will allow a current to pass?
A metal, for example.
What materials does NOT allow a current to pass through it?
Some materials that do not allow a current to pass through them include rubber, glass, and plastic. These materials are classified as insulators because they have high resistance to the flow of electric current.
What is the closed path which current can pass through?
An electric circuit is a closed path through which current can pass. It typically consists of a power source (such as a battery), conductors (wires) that carry the current, and components (such as resistors, capacitors, and switches) that manipulate the flow of electricity.
What is the function of filter in circuit?
Filters are circuits consisting of resistors and capacitors (RC) or inductors and capacitors(LC) to filter unwanted signal components like noise,frequency,etc. Filters can be classified into many types based on different categories. Based on frequency filtering: 1. Low pass(to allow low frequency components) 2.High pass(to allow high frequency components) 3.Band stop or notch (to reject a particular band of frequencies) 4.Band pass(to allow the particular band of frequencies) 5.All pass(to allow all the frequencies)
Can you use a farad capacitor as a battery capacitor?
No. The large farad capacitors are not designed to pass a lot of current. They are intended for ultra-low current applications such as memory retention in a CMOS type device.
Does a Cpacitor allow ac to pass through it?
no capacitor does not allow ac component .if allow then inductor allow dc component .
Why do you use resistors and capacitors in a circuit?
resistors and capacitors are used in order to create a path for the current , for the resistivity of the current , for the storage of the current.AnswerResistors don't just 'resist' electric current, they create a predictable change in voltage (electric potential) from one side to the other, so they can be used to adjust the expected voltage level at each point in a circuit.In an electric circuit with an unchanging current and voltage, capacitors simply store current and wait for something to change.In the more common electronic case of a circuit with voltage fluctuations, each capacitor is effectively a high-pass filter -- it permits quickly-fluctuating voltages to pass through, but reduces or stops slowly-fluctuating voltages.
What are uses capacitors?
.Capacitors are widely used in electronic circuits for blocking direct current while allowing alternating current to pass. In analog filter networks, they smooth the output of power supplies..Capacitors are used in virtually every area of electronics, and they perform a variety of different tasks. Some capacitors are used for coupling, others for decoupling, while others may be used in filters, and some may be used for power supply smoothing. Again some capacitors will be used in low frequency circuits, and others in high frequency circuits.
Is this sentence incorrect any material that allows an electric current to pass through is called a battery?
Incorrect. Any material that allow electric current to pass through it is a conductor.
What is the name given to a material that does not allow current to pass through it?
The material that does not allow current to pass through it is called an insulator. Insulators have high resistance to the flow of electricity, which prevents the movement of electric current. Examples of insulating materials include rubber, glass, and plastic.
How do you make direct current from alternating current?
First, the alternating current is filtered through a rectifier diode, that is, a device that lets the current pass only in one direction. This will produce a current that goes only in one direction, but that pulsates. To smooth this out, i.e., to convert it into a relatively uniform current, capacitors are used as "buffers".
What are the materials that electrial current cannot pass through?
Electrical current cannot pass through materials that are insulators, such as rubber, glass, plastic, and wood. These materials do not allow the flow of electrons due to their high resistance to electric current.
