That is because the part that you touch is made of plastic, which does not conduct electricity.
Yes it is possible.
have your landlord or a friend fix it if you dont know how to switch a light switch because there can be a promblem with the light and its very important that you be safe
hazard switch dont lights on
The murderer will be electrocuted when the switch is thrown. Boy, go cut me a hickory switch and wait for me out by the shed!
Above the brake pedal. If your main brake lights dont work but your third center brake light does, then the brake light switch is not the problem. Its is the turn signal switch.
no they dont but v3s do.
Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.
u have to open a couple doors to find the light switch but i dont know wich ones but if i found it out u can
Check the fuse, the bulbs, and the brake light switch.
=No i dont think that your body would drae blood. However you mite get a cut.=
Yes you can. The proper wiring of a switch is to bring the hot wire to the top of the switch terminal and connect the load to the bottom of the switch. When the breaker is turned off it disconnects the voltage from the top of the switch and the switch is then safe to work on. By not turning the breaker off, the voltage is present at the top of the switch which could subject you to a nasty shock if you come into contact with it.
Check the fuse, check the bulbs, check the brake light switch, in that order.