Check the fuel control relay behind the drivers side kick panel. Could be bad. If that is ok start at the fuel tank and check the wires and connectors to the front of the truck. Good Luck Jerry
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
Below are attached links discussing the horn on your truck.
Get a manual on your truck from DISCOUNTAUTOREPAIRMANUALS.COM They are about $9
I have a 92 b2200 with 325k miles. Ibought it brand new.
At the top of the clutch pedal in the cab of the truck.
The torque specs for the cylinder head on a b2200 are 59-64 ft lbs (cold).
It would depend on the truck's condition. The B2200 short bed truck in excellent condition would be about $1,650. The B2200 long bed would be around $1,750 in excellent condition.
Mazda made a b2200 and b2600 truck in 1989.As for performance the engine is rated at 85hp or so and really just a mpg truck not a power house for dragging trailers or too much weight.The truck is great for general use,and driving and hauling resonable things in the bed with ease over all.
Look under vehicle follow fuel line from tank
All the 1986-1993 mazda b series trucks were manufactured in japan.By the way great built trucks for that matter.
Gap is 0.031 or 31thousandths. your truck has the 2184 cubic inch engine.
The amount of liability a driver has to carry, is decided by the laws of the state in which they live.