0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Does the cooling fins on a car engine?
On cars that have them they are air cooled since there is no radiator.
Fill in the blanks an air cleaner is a filter at the air intake to keep out solids particlesAir cooled engine is an engine with fins on the cylinders f?
= Fill in the blanks- an air cleaner is a filter at the base of the air intake to keep out solids particles = = = = = = Air cooled engine is an engine with fins on the cylinders for cooling purposes?" =
Why are metallic fins are attached to the engine of a motor bike?
They are called "cooling fins". Motorbikes use air-cooled engines, and the "fins" distribute the heat over a great deal of surface area so the air can carry off the heat more efficiently.
Why the metallic fins are attached to the engine of a motor bike?
Many motorcycles are air-cooled, and the fins help create a bigger surface area, which increase the amount of heat that can be transferred from the engine into the air. It's just like the cooling flanges you can find on some computer parts.
How does an air cooled system work?
An air cooled system uses cooling fins, in which air is either blown past these fins by a flywheel or a cooling fan, this air that is blown into these fins carries residual heat away from the cylinder jug.
How do you clean a cooling system on a small engine?
I am a bit confused here. To me, "small engine" automatically means "air-cooled" engine". If you are talking about an air-cooled engine, "cleaning" is a matter of keeping the finned engine cylinder heads free of leaves, grass and excessive dirt and the same thing for the fins in the flywheel fan, that blow air over the cylinder heads.
What is the reason for a motorcycle engine to have fins on its side?
well, the motorcycle's engine is comparatively small, therefore the bike will need to be designed to give the engine some help. the fins are there to make the bike more aerodynamic, meaning that it will slip through the air with less friction and allow the bike to gain higher speeds while using less fuel. Answer: If your question concerns fins on the side of the engine then they are designed to provide more surface area to the cylinder head on an air cooled engine. The greater the surface area of the engine the more the airflow can act on it and cool the engine.
Why submarines need fins?
They need fins because the engine and the fins make a good combo The fins push the water aside while the engine propells the sub forward and that's why i think Fins are nessesary in Subarines.
What are the causes of the turbocharger becoming hot?
Turbo chargers are driven by the hot exhaust gasses from the engine. They also turn at incredibly high speeds, much higher than the engine itself. It is vital that the cooling fins, if air cooled, are kept clean and clear with an adequate air flow. If water cooled then the water temperature properly regulated
What is the advantage of a water cooled engine?
Advantages: -Cylinders only need a thin water jacket around them, instead of cooling fins, which take up more space. -With a water cooled engine, you can have a real heater/ demister. -More efficient heat transfer than air cooling. - Engine temperature can be kept more constant, using a thermostat. Disadvantages: Prone to leaks , and has moving parts that can fail and cause overheating.
What does a cooling fin do on a motorbike?
cooling fins are used to cool down the engine by having the cool air pass through the fins which gets transferred down to the engine, so on a motorbike like all other engine's the cooling fins cool down the engine.
What are the two types of cooling system used on modern engines?
There are basicaly two types of cooling systems 1) Air Cooled 2) Fluid Cooled(Also known as water cooled) Air cooled systems are genarally used in small engines where there is no space for installing a saperate cooling system,like that in bikes. This system is simple and uses fins to to cool the engine. Fluid cooled systems are generally used in big engines like that in care and trucks, where there is impossible to dessipate large amount of heat through mere fins. Fluid used is generaly water mixed with some anti freeze agent(a type of chemical which prevents water to make oxides)
