The abs light stays on when a malfunction has been detected in the antilock braking system. The abs computer will have stored fault codes.
No abs on the 97.
You have to fix the cause of the code that turned the light on. You will need a scanner to read the code.
Yes, I have a 1993 6 cylinder with abs...probably an option.
yes. I'm not sure if the speed sensors for the ABS are located at the wheels or in the diff though. if they're at the wheels then you may be able to remove them from the old axle and attach them to the new, "non-ABS", axle and make it an ABS system.
If the ABS light is on the ABS system has a problem and is not functioning. Until the problem is repaired the light will remain on. Take it to a mechanic and have it diagnosed.
The abs light is on because there is a problem with the system and will remain on until the system is fixed. As long as the light is on the abs will not function.
The abs light is reset with a scan tool after repairing the failure that caused the code.
You need to have the abs codes read, repair the cause, and the light will turn itself off.
The light indicates either a fault in the ABS controller, a blown fuse/relay, or the computer may have malfunction. If the ABS light is "ON" the your ABS is disabled and will not be used, see your dealer/repair shop now.
to turn the abs light off
The ABS and Brake lights stay on when the Abs computer has detected a malfunction and set a trouble code. You need to have the system checked for codes
The abs light stays on when there is a failure in the system. The computer will have set a trouble code. You need to repair the malfunction that caused the code to set.