Why is RPM (speed) so important to the life of a compressor
The approximate loaded speed of a 3600 RPM compressor is between 2500 and 3000 RPM. Because the load puts additional strain on the motor, it reduces its rotational speed.
When loading things from the HDD, like streamin music, videos, ect, but for a consle its not important, if your at 5,400 rpm a 7,200 rpm will only speed up a little.
If your compressor is running above its first or second critical (very likely) then you shoud balance it at its operating speed. You need to do a high speed balance. If you can only do this in situ (i.e not in the workshop) then you can use VibroNurse balancing software which is easy to use and free.
the compressor is coupled with engine.when the engine runs at 1000 rpm ,the compressor also will work at that rpm ,so that is air is compressed in tanks and it is used for applying.
No
The speed of the turbo is the rpm that it is spinning at, and it doesn't have anything to do with engine rpm. Depending on the size of the turbocharger, it has an operating range that it is most efficient at and it also has a MAX rpm. If you look at a compressor map there are arches running across the map, at the end of the arches is the turbo speed. This is rpm that the turbo would be turning at for that P/R (pressure ratio) and flow rate( amount of air the turbo is putting out, lbs/min, kg/s). Max rpm is limited by the speed of sound and the material the compressor wheel is made of . The rpms are usually expressed in tens of thousands of rpms and might be labels with a "K". Small turbos like a garrett T12 have a max rpm of 220,000rpms, while large turbos like the GT60 has a max speed of just 77,921rpms.
945 rpm
HDD RPM speed ?
Speed settings on a record player refer to the number of revolutions per minute (RPM) at which the turntable spins while playing a vinyl record. Common speed settings are 33 1/3 RPM for most LPs and 45 RPM for singles. It is important to select the correct speed setting to ensure the record plays at the intended pitch and tempo.
Idle speed will vary from 600-1000 rpm.Idle speed will vary from 600-1000 rpm.
Idle speed could be 550-900 rpmIdle speed could be 550-900 rpm
750-1100rpm