The seal is shot, time to replace the compressor.
why does my C5 corvette idle poorly ,just for a few seconds when coming to a stop?
== ==
Follow the belt It should be a big Silver thing with 2 Aluminum tubes coming off it.
sometimes you get what's coming to you
Sometimes You See It Coming was created in 1993.
my 1976 corvette is supped up and she will run a solid 165 it will probably do more but i dident want to push it cause the nose was coming off the ground
all you have to do is fallow the line coming out of the compresser on is the high side the smaller fitting is the low side
Its coming out sometimes this month
The one you want to use (the low pressure fitting) is located on the compresser or on the line imediately coming out of the compresser. You will need to lay on ground in front of car and reach up to the compresser to make the connection. There's not much room to work and it's tricky to get lined up. Also you have to do this by feel since you can not see it. If this is a problem, then jack up the car. Good Luck. It's a horrible design.
sometimes and sometimes not
I had the same problem and mine was an injector leaking but not all the time.
Generally, with that smell- the heater core has gone bad.