Chlorinated Poly (Vinyl Chloride) (CPVC) is a thermoplastic pipe. CPVC piping which is suitable for hot and cold water distribution has a 400 psi pressure rating at room temperature, and a 100 psi pressure rating at 180 F.
PVC pipe cannot meet the high temperatures that CPVC pipe can. PVC corrosion resistant pressure pipe, IPS sizes 1/8" through 24", is ideal for use in applications with temperatures up to and including 140°F.
Polyvinyl chloride, (IUPAC Poly(chloroethanediyl)) commonly abbreviated PVC, is the third most widely used thermoplastic polymer after polyethylene and polypropylene.
Chlorinated polyvinyl chloride (CPVC) is a thermoplastic produced by chlorination of polyvinyl chloride
PVC pipe is usually the term for PVC pressure pipe. In small sizes, it is usually white in color. If suitable for potable water, it will be marked with "NSF" which means that it has been tested for potability and approved by the National Sanitation Foundation, headquarted in Ann Arbor, MI. and will have a pressure rating printed on the pipe. Larger sizes used for main lines may be white or blue, with the blue color signifying the pipe is made to AWWA C-900 standards, a higher pressure rating than SDR or Sched 40 ratings. Conduit is the term applied to PVC pipe made for electical wiring containment. It is usually in a gray color and should be approved by Underwriters Laboratories (UL mark) for the intended application. Conduit is also used for communication wiring. Gray conduit is not rated for pressure pipe applications and may not be suitable for potable water use. Stabilizers and other ingredients used in conduit PVC may be toxic; conduit PVC is not held to the same drinking water standards as NSF marked pipe and should not be used in potable water systems.
PVC is used in most applications including pressure situations. it is solid and has a larger join area to maximise contact.
DWV is used in most waste, gravity fed and non pressure applications. it is foam core, not solid so wont stand up as well in high pressure situations.
You can use CPVC to plumb your water supply instead of copper pipe.
PVC is suitable for drains or non-potable water since it releases chemicals which are harmful for humans to consume.
Return the PVC to the store and purchase the CPVC you need.
The type of service they are to be used for In a home PVC is used for the drains,the drain vents,main out going sewer line,water supply lines for a boiler/heating system or sprinkler systems. In a home CPCV is used to supply water to sinks,toilets, showers,hot water heater and exterior faucets... Because of the difference in usage there is also a difference in the wall thickness between the PVC pipe and CPVC pipe... So a 3/4 in PVC fitting will not match up to a 3/4 in CPVC pipe and vise versa...
Always use cpvc for hot water and PVC for cold water.
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
NO. PVC is for cold water only, CPVC is for hot or cold. I say forget the CPVC and just use pex.
Chlorinated Polyvinyl Chloride (CPVC) pipes can withstand heat up to 180 degrees. A special glue is used to blond it together. PPR pipes are a made of plastic and uses no glue as it is heat-fused. PPR is a commercial product.
CPVC is better suited for hot water
No PVC cement can not be used on cpvc pipe. Cpvc and PVC pipe have different chemical compositions so a cement made for one will not work for the other. The process of joining plastic piping together is called solvent welding and the use of the wrong formulation will result in an inferior weld
PVC is used for cheap drainage systems and venting and some lawn furniture and many chemical wastes CPVC is used for cheap hot water piping systems
There is no special PVC pipe. CPVC can be used for hot water applications or in my opinion just use PEX pipe.
CPVC is Chlorinated Polyvinyl Chloride . This is a type of PVC piping that is chlorinated in order to allow it to withstand exposure to high temperatures.
no, use CPVC instead.