The capillary tube is fixed in the Ostwalds viscometer is for passing the liquid.
A capillary flow viscometer, or Ostwald viscometer, consists of a U-shaped glass tube held vertically in a controlled temperature bath. It was named after its inventor, Wilhelm Ostwald.
capillary tube and fixed orifice
A Capilliary Viscometer measures the speed at which a lquid can be forced through a narrow tube (a capillary). Thicker liquids (high viscosity like treacle) will take a lot longer to squeeze through the tube than a thin liquid (like white spirit). If you take a fluid (liquid) like blood it could be put through a Viscometer like this to see if your blood was too thick or thin. Also it could be used to check if your engine oil met up to spec. Big Subject!!!! Contact me if you want to know more...
the height of a capillary tube is not dependent on
capillary tube are classified under fixed oriffes metering device it is thin and long inorder to control the refrigerant pressure and temperature not to evaporate ontheir way unitl it reach the evaporator.
because,the adhesive force of mercury in more compared to the cohesive force which acts on a capillary tube. that's why mercury falls in capillary tube
The Capillary tube metering device is used primarily on small fractional-horsepower refrigeration systems that have relatively constant evaporator heat loads. These systems are hermetically sealed, leak free systems with dry-type evaporators that use a minimum of refrigerant. The capillary tube metering device is a fixed bore device, itcontrols refrigerant flow by pressure drop.
The capillary tube is used on the inside of the refrigerators. It is a long copper tubing that is used as a thruster.
excess superheat in a capillary tube systems means that there is ______ charge
deduce an expression for height of a liquid in capillary tube. also write practical applications of capillary action.
Vernier microscope radius of capillary tube
i dont know ha ha ha