This is because the oil has flash over point at 140 deg.Cl and the winding insulation cannot exceed the flash point of the oil.
what do you mean repair hv winding whats wrong with it
The maximum temperature in Class F insulation is 150* C.
50
Class Y insulation can withstand a max temperature of 90 degrees centigrade. Examples are Cotton, Silk, Paper, Wood, Cellulose, etc.
a ct is a current transformer the primary is one turn this can be a hole you pass a wire thru the laminations the wire you pass thru the hole can be 300v 600volt or 13200Volt insulation the core is bolted to the enclosure clamp on ammeter Amprobe are portable multi class current transformers with meters right on the side
what do you mean repair hv winding whats wrong with it
The maximum temperature in Class F insulation is 150* C.
I am aware that Class TPS current transformers have a Low Leakage Flux design
Class F insulation is the class of insulation which will give a service life of 20000 hours when maintained continuously at a temperature of 155 degee, which is the temperature index of class F.
50
Class Y insulation can withstand a max temperature of 90 degrees centigrade. Examples are Cotton, Silk, Paper, Wood, Cellulose, etc.
Class 7 refers to noise insulation. There may be a bit of confusion between insulation classes.There is Electrical insulationHeat insulation andNoise insulation.Each have their own classification numbers and/or letters.
a ct is a current transformer the primary is one turn this can be a hole you pass a wire thru the laminations the wire you pass thru the hole can be 300v 600volt or 13200Volt insulation the core is bolted to the enclosure clamp on ammeter Amprobe are portable multi class current transformers with meters right on the side
Supplies of class 2 transformers can be found on Foster Transformer, Amazon, eBay, Surveillent, B&H Photo-Video-Audio, Sears, Altex Electronics, and Signal Transformer.
maybe you can go to the mall orite
only on movies
Depending on the size of the transformer, several different types of insulator are used. These include varnishes, plastics, paper, and fabrics (to insulate the windings), wood (spacers), and oil. Transformer oil improves the insulation value of paper, fabrics, and wood when absorbed by them. The oil has a secondary purpose, which is to cool the transformer.