To be precise this kind of hi voltage is called distribution by power company. 11kv 16 kv that type of voltage. however transmission can be in the range of 5ookv. And you can see at tower from interstates lines
A digital voltmeter with a range up to 11kV would be suitable for measuring a voltage of 11kV. Ensure the voltmeter is rated for the high voltage to be measured and follow safety protocols when working with high voltage systems.
i think 11kv per insulator
High voltage reduces the amount of energy wasted in transmission lines.
The test equipment used to test high voltage cables is a hi-pot test where a high DC voltage is a applied to the cable. This voltage can be from 150% to 200% of the working voltage of the cable.See related links below.
High Tension transformer means (HT) high voltage transformer.
Regulation =(Obtained voltage per phase - rated voltage per phase)/rated voltage per phase *100
In British standard voltage classified Low Voltage( up to 1000 v (1 kv) medium voltage 1001 v to 10000 v ( 1.01 kv to 10.99 kv) High voltage 11kv to 66 kv and Ehv 66.1kv and above.
The higher voltage it transformed to a lower voltage by the use of a step down transformer.
High voltage cables with this high an insulation factor are usually given a Hi Pot (High Potential) test and not meggered. The potential has to be higher that the working voltage of the cable to be effective when checking for insulation or connector breakdown.
6350.8 volts AC rms. The phase to earth voltage is ( square root(3) ) x lower than the phase-phase voltage on a 3 phase system.
220v, 415v, 6.6 kv, 11kv,33kv,132kv,400kv
Yes. But,circuit breaker are usually rated in terms of current they can interrupt,not the voltage.