i think 11kv per insulator
220v, 415v, 6.6 kv, 11kv,33kv,132kv,400kv
Yes. But,circuit breaker are usually rated in terms of current they can interrupt,not the voltage.
The test equipment used to test high voltage cables is a hi-pot test where a high DC voltage is a applied to the cable. This voltage can be from 150% to 200% of the working voltage of the cable.See related links below.
if we take 11kv /33kv yhe current produced will be less when compared to 230v/11kv.. the curent produced will be gerater than 1000amp or above so the winding of the transformers will damage because thier is no winding at present to with stand the huge amount of current by K.B.N.GANGADHAR sasi institute of technology and engineering
A digital voltmeter with a range up to 11kV would be suitable for measuring a voltage of 11kV. Ensure the voltmeter is rated for the high voltage to be measured and follow safety protocols when working with high voltage systems.
To be precise this kind of hi voltage is called distribution by power company. 11kv 16 kv that type of voltage. however transmission can be in the range of 5ookv. And you can see at tower from interstates lines
i think 11kv per insulator
Regulation =(Obtained voltage per phase - rated voltage per phase)/rated voltage per phase *100
The higher voltage it transformed to a lower voltage by the use of a step down transformer.
High voltage reduces the amount of energy wasted in transmission lines.
6350.8 volts AC rms. The phase to earth voltage is ( square root(3) ) x lower than the phase-phase voltage on a 3 phase system.
220v, 415v, 6.6 kv, 11kv,33kv,132kv,400kv
Yes. But,circuit breaker are usually rated in terms of current they can interrupt,not the voltage.
The test equipment used to test high voltage cables is a hi-pot test where a high DC voltage is a applied to the cable. This voltage can be from 150% to 200% of the working voltage of the cable.See related links below.
Depends on the sub station. It could be 11KV, 33KV, 66KV,110KV, 220KV, 400 KV etc
if we take 11kv /33kv yhe current produced will be less when compared to 230v/11kv.. the curent produced will be gerater than 1000amp or above so the winding of the transformers will damage because thier is no winding at present to with stand the huge amount of current by K.B.N.GANGADHAR sasi institute of technology and engineering