See related links; this should shed some light :P
A fixture is what the light bulb goes into.
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
Yes. The difference between fixtures rated for indoor and outdoor use is their level of protection from outside elements, i.e. moisture. Using an indoor rated fixture outdoors would result in an early failure due to water intrusion into the fixture. Using an outdoor fixture indoors should work fine. Also, because of the more robust nature of fixtures rated for outdoor service, they are usually more expensive.
Disconnect the fixture wires and remove the central mounting nut to release the dome from the light fixture in a ceiling fan.
It just holds the bulb, does not have a switch in the fixture.
Types of lightning fixtures that can provide general ambient indoor are Chandelier, Ceiling mounted fixture, Wall-mounted fixture, Track light, Floor lamp, and table lamp.
A fixture is what the light bulb goes into.
The correct spelling for a fancy light fixture is "chandelier."
Home Depot offers all your house indoor and outdoor needs. They have a light fixture that operates when it detects movement which is nice at night when you don't want to leave a light on all night.
Yes. The difference between fixtures rated for indoor and outdoor use is their level of protection from outside elements, i.e. moisture. Using an indoor rated fixture outdoors would result in an early failure due to water intrusion into the fixture. Using an outdoor fixture indoors should work fine. Also, because of the more robust nature of fixtures rated for outdoor service, they are usually more expensive.
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
Take the nut off at the bottom of the light fixture by unscrewing it.
Disconnect the fixture wires and remove the central mounting nut to release the dome from the light fixture in a ceiling fan.
It just holds the bulb, does not have a switch in the fixture.
A lock is a fixture, same as a light, sink, tub. A fitting is usually a part of a fixture, or a fixture is made up of fittings.
If the question is, can I wire a switch to an existing light fixture (and I must assume that it's something like a pull-chain light fixture), the answer is yes.If the question is, "how do I wire a switch to an existing light fixture that has no external switch", the answer is, "in series".The attached web site gives simple instructions on how to wire a basic light switch to an existing light.See sources and related links below
A fixture or device that holds a light in place by means of some sort of socket, that is connected to a power source.