0
A lock is a fixture, same as a light, sink, tub. A fitting is usually a part of a fixture, or a fixture is made up of fittings.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What are some examples of a tee joint in the electrical trade?
A tee joint in the electrical trade is a conduit fitting. It is used in conduit work where there needs to be a device connected into the main conduit run. An example of this is where a light switch needs to be installed into the conduit run. The main conduit run starts at the distribution panel and proceeds to a lighting fixture. On the way a switch is needed to operate the light fixture. In the main conduit run a tee fitting is installed so as to pick up the switch for the fixture. When the conduit system is complete the wire is then drawn in. The "hot" conductor is pulled to the tee fitting and then diverts to the switch box to pick up the switch and then back up the same conduit to the tee fitting and then on to the lighting fixture. Splices are not usually made in tee fittings.
What do you use to make a lamp or light fitting light up?
Really need more info.lighting fixture on ceiling fan.ect.......
Although it is too simple an explanation the concept of a key fitting into a lock is descriptive of the?
matching of enzyme with the substrate
Can a 12 2 low voltage line light up a 120 volt led light fixture?
What needs to be checked is the voltage of the low voltage line. If it is 120 v, that is suitable for a 120 v LED fitting. Second, is the line capable of carrying the current needed by the fixture. The answer to that is, probably, but it still needs checking.
Can one replace a tungsten bulb with a compact fluorescent bulb?
Yes, if it fits the socket and the light fitting, or lamp fixture, with its cover or shade. You will not be able to dim the compact fluorescent as you did the incandescent (unless you have a really fancy dimmer).
How do you determine if the drain size is 4 or 3?
By the fixture units connected and the developed length of piping and fitting
What are some examples of a tee joint in the electrical trade?
A tee joint in the electrical trade is a conduit fitting. It is used in conduit work where there needs to be a device connected into the main conduit run. An example of this is where a light switch needs to be installed into the conduit run. The main conduit run starts at the distribution panel and proceeds to a lighting fixture. On the way a switch is needed to operate the light fixture. In the main conduit run a tee fitting is installed so as to pick up the switch for the fixture. When the conduit system is complete the wire is then drawn in. The "hot" conductor is pulled to the tee fitting and then diverts to the switch box to pick up the switch and then back up the same conduit to the tee fitting and then on to the lighting fixture. Splices are not usually made in tee fittings.
What do you use to make a lamp or light fitting light up?
Really need more info.lighting fixture on ceiling fan.ect.......
How do you connect a lock valve to hydraulic cylinder?
The lock valve is connected to a hydraulic cylinder by forcefully pressing it into the fitting and releasing the retaining ring. This will lock the cylinder into place and keep it from moving.
A good analogy for the way in which a neurotransmitter binds to receptor sites is?
a key fitting in the lock of a door
Can you use an energy saving light bulb in a light fitting with a light sensor?
yes as long as the sockets match up and it is not a high output light fixture
Where can I find toilet stalls?
Toilet stalls can be purchased through any bathroom fixture and fitting supplier. There are various types available and the following company has a good selection: http://www.manningmaterialsinc.com/
Can you buy a cap for the hose part of the shower head?
If the hose screws onto the fixture, it should be a compression fitting, most likely a 3/8's. It will be brass, not chrome finished.
Which is a fixture?
what is a sentence for fixture
Although it is too simple an explanation the concept of a key fitting into a lock is descriptive of the?
matching of enzyme with the substrate
Can a 12 2 low voltage line light up a 120 volt led light fixture?
What needs to be checked is the voltage of the low voltage line. If it is 120 v, that is suitable for a 120 v LED fitting. Second, is the line capable of carrying the current needed by the fixture. The answer to that is, probably, but it still needs checking.
Is a fan a fixture or furniture?
It would be a fixture.
