answersLogoWhite

0


Best Answer

i personally never heard that is not adviseable but the only thing that i could think of is. the psi in use on a regular power steering system ranges from 500psi to 1,000psi. this means that when your wheels are turned all the way you are using the highest psi allowable by your particular system. by keeping the wheels turn for a long period you are sending a high psi to either the rack and pinions or gear box and well the high psi may rupture a seal, cause leaks and power assist failure.

The reason this is advised (I advise all my customers on this one) is because the seals have a finite life and lose their elasticity through age, heat and pressure. Because the pump reaches it's maximum pressure at this point, the relief valve allows the fluid to by pass in the pump. This causes a heat build up very quickly. Try this (not for too long though), then go and feel the temperature of the relief valve on the pump. You'll get an idea of what the seals have to endure...

www.powerbrakeandsteering.co.za

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why is it advised not to hold the steering on to its extreme end for long on power steerings?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do all 1996 Ford Fiesta 1.3 encore have power steering?

Yes, ..96 have power steerings No not all 1996 Ford Fiestas have power steering!


Is it safe to drive a car with a broken serpentine belt?

Not advised, it runs the fan and the ancillary devices, power steering, etc.


How do you bleed the power steering on 2002 town and country?

Start the engine and turn the steering wheel from stop to stop. As you turn the steering wheel from extreme left to extreme right this will remove the air from the system. You may have to repeat this a few times to remove all the air.


Does steering stationary damage car?

No ... However, don't turn the steering wheel (power steering) from one extreme to the other. Don't turn it all the way right or left, if you do it will damage the steering unit. Stop turning when you hear the noise and back off.


Why won't the wheels turn left in a 1992 Ford Taurus unless extreme strength is used to turn the steering wheel?

you probably need to replace power-steering fuel. this is easy and you can do it yourself.


When the engine shuts off does the power steerings die?

If by "die" you mean stops working, then yes, the power steering is disabled when the engine is not running. The power steering is actually a hydraulic pump that assists your effort in turning the steering wheel. The pump is powered by the engine, so when the engine is off, so is the power steering. Incidentally, if you should lose power steering while the car is moving (engine dies, belt failure, hydraulic line breached, etc) you haven't lost the ability to steer, you've only lost the power assist. Also, in most modern cars when you turn off the car, the steering wheel lock engages. This is an antitheft measure, such that the car is difficult to push away when it's turned off (to a loading ramp, for example) because it cannot be steered. It's not worth much, as obviously the most effective way of stealing a car is to hotwire the ignition and drive it away.


How install a power steering pump for a 1989 corvette?

Secure the power steering pump with the retaining bolts. Attach the power steering hose to the power steering pump. Put the belt on to the power steering pump. Fill the power steering system with fluid.


What if you still add power steering fluid to a leaking power steering?

What will happen if u I added power steering fluid to a leaking power steering pump


How much does a power steering pump?

A power steering pumps as much as the power steering pump can pump.


Where is power steering fluid located in car?

in the power steering resevoir,above the power steering pump..


What is power steering fluid Where does it go?

power steering fluid is fluid that makes the power steering pump work and it goes in the power steering pump under the hood.


How to Remove power steering pump on mystique?

Remove the power steering pump hose. Remove the power steering pump belt. Remove the power steering pump retaining bolts. The power steering pump will come off.