0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Does light reflect off the surface of metal?
It reflects off the surface of shiny and smooth metals.
Does light reflect off a rough surface?
It can reflect off a rough surface but the image is not clear ,causing an irregular reflection.
What is bouncing of light from a surface?
When light bounces off a surface, that is called reflection.
What is the bouncing off light of a surface?
The bouncing of light off a surface is called reflection. When a light wave is bent it is called refraction.
How do you take off a stuck earring?
Gently pull it out.
How do you pull down the plunger in The Cat in the Hat game for PC?
Jump up onto the plunger. Jump up and press CTRL when he's in the air and the cat will swing his open umbrella underneath him, landing on the umbrella and set off the plunger. You will need to use this same move on other things later in the game.
1992 Chevy caprice brake light stays on but the brakes are off?
brake light plunger switch on the brake pedal maybe faulty, remove it and connect the two wires together and pull apart and see if lights go on and off
Can you use a PIN with no trace left behind?
I theory, yes. but it may be difficult to pull this off in reality.
How do you make a slurry for dogs medicine?
The easiest way I have found is to pull the plunger out of a large syringe (60 cc works great). Drop the tablet(s) into the front of the syringe and put the plunger back in. Run tap water from a faucet and stick the tip of the syringe into the running water. Pull back on the plunger to get 20-30 ccs of water in the syringe - it should be about half full. Turn off the faucet and place your index finger over the tip of the syringe. Shake until the tablets are dissolved, then use the syringe to "inject" the slurry into your dog's mouth.
What made Houdini's job difficult?
His dangerous illusions and tricks you have to be very talented to pull those off and not die.
If a 97 Toyota Camry is dented below the driver's side door window and the window will not close would you need to replace the door?
Get a friend to use a plumbers helper or plunger to stick on the door and pull it off and see if it is possible to pull the door skin out enough to free the window.
How do you remove brake booster 1980 corvette?
There are four bolts holding the booster to the firewall, two holding the master cylinder to the booster, and and a retaining clip or cotter pin on the plunger rod to pedal attatchement. The Upper booster mounting bolts are the most difficult to remove. I had to Remove steering the column assembly, You can remove the entire dash, (which is what I did) or just the instrument cluster. Then , using a long extention, the bolts are easily accessed. There is no need to disconnect the brake fluid lines, just pull the master cylinder off to the side with a bungy cord. Remove the retaining clip on the pedal, then the four mounting bolts. It should pull right out the front..When re assembling, lube the push rod plunger, (its a short 2" or so rod)make sure its in place when putting the booster back in the firewall,, the grease will help the plunger stick where it needs to be alsol.. You'd be surprized, mine fell off in the box, (the plunger) and almost got overlooked! Hope this helps
Why do the brake lights constantly stay on whether the vehicle is on or off?
There is a brake light switch mounted high up on the brake pedal. The switch has a plunger which is released (extends) when you step on the brake pedal. This completes an electrical circuit. The switch has either come loose from where is it mounted so that the plunger is released all the time or part of the plunger has broken off. This has the same effect as having the plunger released.
Two energies the sun gives off are?
one is nuclear energy another is gravity pull the energy onto the surface
How do you pull a heist?
Because of increased security features and security technology, it is very difficult to pull off a heist nowadays. Also, those who are able to pull a heist are more often than not apprehended by law enforcement.
How do you remove the inside drivers side door panel on a 1998 Cadillac Catera you can't get it past the lock?
You have to remove the lock plunger. The red plastic inset in the plunger actually locks the plunger onto the "threaded" shaft. Pry out this center piece and the lock plunger will come off the top...and the rest of the door panel can be removed.
How do you make a BBS?
How to make a BB gun using a pen get a pen...take everything off of/ inside of the pen...get the case of it (the body) get a mechanical pencil...take the plunger out (the thing holding the eraser) NOTE: the pencil MUST be the kind with the plunger running all the way down the body on the inside put the plunger in the pen body (it should be able to slide in and out with NO problem) get 1-4 rubber bands, cut them so that they make a C shape (one cut) put all of them together so that they fit together...put the middle of the mass on top of the pencil plunger...stretch the rubber band cluster towards the bottom of the pen body...use glue or something to attatch the cluster there...wait for it to dry...then, pull back on the plunger, put a BB in the body, aim, and release the plunger...there you go, it shot... these can be modified
