Want this question answered?
The microscope stage is the platform on which a slide is placed for viewing.
a cover slip
A cover slip or cover glass is a thin flat piece of transparent material, usually square or rectangular, about 20 mm (4/5 in) wide and a fraction of a millimetre thick, that is placed over objects for viewing with a microscope. The object is usually held between the cover slip and a somewhat thicker microscope slide, which rests on the microscope's stage or slide holder and provides the physical support for the object and slip.The main function of the cover slip is to keep solid specimens pressed flat, and liquid samples shaped into a flat layer of even thickness. This is necessary because high-resolution microscopes have a very narrow region within which they focus.The cover glass often has several other functions. It holds the specimen in place (either by the weight of the cover slip or, in the case of a wet mount, by surface tension) and protects the specimen from dust and accidental contact. It protects the microscope's objective lens from contacting the specimen and vice-versa; in oil immersion microscopy or water immersion microscopy the cover slip prevents contact between the immersion liquid and the specimen. The cover slip can be glued to the slide so as to seal off the specimen, retarding dehydration and oxidation of the specimen. Microbial and cell cultures can be grown directly on the cover slip before it is placed on the slide, and specimens may be permanently mounted on the slip instead of on the slide.
1.Eyepiece or ocular- upper optical component that further magnifies the primary images and bring the right rays into focus.2. Draw tube- it is the cylindrical structure which is used to support the eyepiece.3. Body tube- connects the ocular to the objective lenses.4. Coarse Adjustment Knob- It moves the tube up and down to magnify thespecimen.5. Fine Adjustment Knob- It adjusts the focus slightly, to make the image clear.6. Arm- basic frame to which the base, body and stage are attached and acts as aconnector between the base and the head of the microscope.7. Stage- Table of the microscope where the glass slide is placed and helps insupporting the specimen and helps you to keep the specimen on thecorrect location.8.Stage Clip- The stage clip hold the the specimen slide firmly on the stage and isneeded if the microscope is tilted.9. Glass Slide- is the place where specimen is place to view in the microscope.10. Inclination Joint- It allows one to tilt the upper part of the microscope so thatyou can view the specimen while seated.11.Base- it helps in supporting the microscope and contains the illuminator.12.Diaphragm- it controls the amount of light that passes through the stage and,consequently, through the specimen.13.Dust Shield- It protects the objectives from dust.14.Revolving Nosepiece- This is the part that holds two or more objective lensesand can be rotated to easily change power.15.Objectives- it gathers light from the sample or object under study.16.Mirror- is used to focus light up through the hole in the microscope's stage,or slide platform. The slides will contain a thin slice of materialthrough which the light can shine, to reveal the internal structure ofthe sample.17.Mirror Rack- holds the mirror in place.
At least 10 centimeters. Preferrably keep it near the center, so its very hard to fall.
The specimen is placed on a microscope slide, and a thinner slip or cover placed on top.
it is where the specimen to be viewed is placed.
\to the stage
The light microscope and the electron microscope refers to the type of microscope that is used to view the non- living specimen. The non-living specimen is usually placed in a slide.
a piece of cork
Cover slip
On top of the Microscope slide, the specimen you wish to examine is place and then water and a coverslip is placed on top of that. Other things may be added depending on the speciment you wish to examine such as stainers like Iodine.
The microscope has two systems of lenses: the ocular lens into which the observer looks; and objective lenses placed directly above the object being observed.
Coverslip is not placed on a microscope but on the stained specimen on slide . This protects objective lens of microscope from getting stain from a wet mount . It also protects permanent slide .
The light microscope and the electron microscope refers to the type of microscope that is used to view the non- living specimen. The non-living specimen is usually placed in a slide.
Coverslip is not placed on a microscope but on the stained specimen on slide . This protects objective lens of microscope from getting stain from a wet mount . It also protects permanent slide .
A cover slip is a small, and extremely thin piece of glass used in the operation of a microscope. The cover slip is placed on top of the specimen which is then placed under the microscope. The function of the cover slip is that it keeps the specimen in place while you examine it.