a cover slip
Petri dish.
Meniscus. Essentially it is because water adheres to the glass.
To examine it under the microscope, the specimen needs to be illuminated by either a light underneath or a stream of electrons. If the specimen is too thick, and light or electrons cannot penetrate it, the scientist will be unable to see any detail.
Put the specimen in the bottle.I brought back a specimen of English money.They put the bullet in a specimen bag.
A cover slip or cover glass is a thin flat piece of transparent material, usually square or rectangular, about 20 mm (4/5 in) wide and a fraction of a millimetre thick, that is placed over objects for viewing with a microscope. The object is usually held between the cover slip and a somewhat thicker microscope slide, which rests on the microscope's stage or slide holder and provides the physical support for the object and slip.The main function of the cover slip is to keep solid specimens pressed flat, and liquid samples shaped into a flat layer of even thickness. This is necessary because high-resolution microscopes have a very narrow region within which they focus.The cover glass often has several other functions. It holds the specimen in place (either by the weight of the cover slip or, in the case of a wet mount, by surface tension) and protects the specimen from dust and accidental contact. It protects the microscope's objective lens from contacting the specimen and vice-versa; in oil immersion microscopy or water immersion microscopy the cover slip prevents contact between the immersion liquid and the specimen. The cover slip can be glued to the slide so as to seal off the specimen, retarding dehydration and oxidation of the specimen. Microbial and cell cultures can be grown directly on the cover slip before it is placed on the slide, and specimens may be permanently mounted on the slip instead of on the slide.
The specimen is placed on a glass slide and covered with a coverslip before being placed on the stage of the microscope for viewing.
The thin glass plate that is placed on top of a specimen in a microscope is called a coverslip. It helps to protect the specimen and ensures that the objective lens can focus properly on the specimen.
The glass slide is the flat, rectangular surface where specimens are placed for examination under a microscope. It is typically made of clear glass and is used to hold the specimen securely in place for viewing.
The small piece of glass used to cover the specimen on the slide is called a cover slip. It is placed on top of the specimen to protect it and to prevent it from drying out during observation under a microscope.
It's called a slide.
The glass sheet that a specimen is placed on is called a microscope slide. It is a thin flat piece of glass used to hold and view specimens under a microscope.
The object that you look at under a microscope is called a specimen. It is placed on a glass slide and then magnified and viewed through the microscope lens.
A glass slide is typically used to hold the specimen in place under a microscope. The specimen is placed on the slide and covered with a coverslip to protect it and provide a flat surface for viewing.
A specimen is placed on a glass slide and covered with a coverslip. The slide is placed on the stage of the microscope and viewed through the lens system. The image can be observed and magnified through the eyepiece or projected onto a screen for easier viewing.
A cover slip is a thin, flat piece of glass or plastic placed over a specimen on a microscope slide. It helps protect the specimen from dust and damage, while also flattening the specimen to make it easier to view under a microscope. Cover slips are commonly used in microscopy to provide a clear, flat surface for observing specimens.
The small platform where the specimen is mounted for examination on a microscope is called a microscope slide. It is a thin, flat, usually rectangular piece of glass or plastic on which the specimen is placed for observation under the microscope.
Obviously, an enlarged specimen.