If you don't properly thread a sewing machine, a number of mistakes can occur:
It is important that the tension on a sewing machine is correct because the tension is what regulates thread while it is sewing the stitches. If the tension is too tight for the fabric and thread, the thread will break. If the tension is too loose, the thread will ball up on the bottom of the fabric.
If the machine is not threaded properly, it wont put the correct amount of tension when it's being operated. If the tension isn't correct, there will be tangles or the thread will snap.
What does the tension disc do on the sewing machine
tension machine is a machine used for sewing
Tension on a sewing machine refers to how taught the cotton on a sewing machine is. If it is too tight then the thread might snap and if it's too loose then the stitches will be uneven.
the tension is probably wrong. try tightening/losening it.
Upper tension regulator is a part of a sewing machine which is a dial or disk that controls the tightness (tension) of the upper thread.
It regulates the thightness or lossness of the thread.
The machine won't work if not in correct order. Believe me. Many times a screw up or mistake is because of not following the directions. Sewing machines have those books too.
Perhaps you have the sewing machine tension too high? Perhaps you have cheap thread designed for hand sewing?
They should sit down flat on the fabric, but should not be so tight that the fabric tewns to ruckle up.
If your stitch is too loose, the fabric will not be joined tightly.
The presser foot is a special part of the machine that holds the fabric down so the stitches remain even. I have not seen a pressure regulator on a home sewing machine.
The tension control on a sewing machine determines how tight or loose the thread in each individual stitch is. The top and bobbin thread tension is like a tug-of-war. If each side is pulling equally, you have perfect tension. Imperfect tension is evidenced by thread loops on the bottom if the top tension is too loose and the same on top if the bobbin tension is too loose.