Because gas will escape into the air, making more dangerous air, so if you light the match with all the gas in the air, a tiny explosion will occur
Before lighting, place the Bunsen burner at least 12 inches in front of any overhead shelving or equipment and be mindful of loose hair or clothing, like your lab coat. Always keep safety equipment, like fire extinguishers and safety blankets, close at hand.
It is dangerous as other people may just place their hand or other objects over the Bunsen burner causing injuries or burns, especially if it is a non-luminous flame which makes it difficult to tell that the burner is actually lit. You should always switch off the Bunsen burner before leaving to prevent injuries to others and yourself.
So they can be fresh for a long period of time before opening βΊοΈ
you don't have to!The above answer is dangerous and incorrect:You turn off the burner before the water evaporates so the glass will not shatter and spray glass shards and dangerous chemicals all over the lab. You should because then it will be so hot around 90-100 degrees and it can burn you
It is important to remove the carbon dioxide from the solutionf before doing the titration because, carbon dioxide mixed with water is acidic, it produces an acid.
IN a cupboard but make sure there is a plastic basket and the Bunsen burner must be cooled before stored.
So that you don't lose it.
Before lighting, place the Bunsen burner at least 12 inches in front of any overhead shelving or equipment and be mindful of loose hair or clothing, like your lab coat. Always keep safety equipment, like fire extinguishers and safety blankets, close at hand.
An alcohol burner was used.
lighting comes before thunder because it is the heat of lighting that causes thunder
there should be a knob on the bottom, make sure that it is loose, turn the top of the burner like you are unscrewing it, then turn the gas on, use a striker or fire starter to light it over the top, you should hear the gas moving through it before lighting it
before they opening they see it under tree
The gas in a bunsen burner comes from a hose attached to a tank. Before that the gas comes from deep in the earth as raw natural gas.
i have know idea
Lighting the lamps means carry you life from dark to bright and before it stays dark and after lighting lamp its bright
The Bunsen burner has helped us in our daily lives by burning or boiling things to get us deeper into science which we nevercould have got to before.
Because more air is able to fuel the flame's reaction; the collar at the bottom of the tube is adjusted so more air can mix with the gas before combustion, the flame will burn hotter.