0
Why is it important to separate loads before sterilizing them in an autoclave?
Wiki User
∙ 10y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the reason for heating the tubes before and after each transfer?
You are not so much as heating tubes but preventing unwanted microbes from "sneaking" into the culture. You are sterilizing the mouth of the tube before and after.
Does the DNA must occur before a cell can divide?
Before a cell can separate, it has to unravel its chromosomes and clone all its DNA
The relative vapor pressures of the mixture components are important in GC Gas Chromatography but not in LC Liquid Chromatography Why is that?
In Gas Chromatography, before you can correctly separate and identify the components, you need to vapourise the mixture first. How fast a substance vaporises is dependent on their vapour pressure. In Liquid Chromatography, there is no need to vapourise the mixture and hence vapour pressure is not important here.
What is the method to separate small metal piece from oil?
Strain It with a small hole strainer. Trust me, I've done it before.
Why is it important for the chomosome to make copies of themselves BEFORE mitosis occurs?
Because it has to duplicate itself before it goes through the process of mitosis.
Will UV sterilizing light at 253.7nm damage a LCD screen?
Ultraviolet light should not harm your LCD. Remember to have the screen off before sterilizing it though, just to be safe.
What is a bottle sterilizer?
In the context of child-care - it's a container (usually clear plastic) that the user fills with clean tap-water. The bottles are placed in the container - and sterilizing tablets or fluid is added. The bottles are left to 'soak' in the sterilizing water for a time determined by the manufacturer of the sterilizing product, before being rinsed in clean water prior to use.
What is bottle sterilizer?
In the context of child-care - it's a container (usually clear plastic) that the user fills with clean tap-water. The bottles are placed in the container - and sterilizing tablets or fluid is added. The bottles are left to 'soak' in the sterilizing water for a time determined by the manufacturer of the sterilizing product, before being rinsed in clean water prior to use.
Why is it important to separate packed cells before transfusion?
So that blood clots cannot form
What is the reason for heating the tubes before and after each transfer?
You are not so much as heating tubes but preventing unwanted microbes from "sneaking" into the culture. You are sterilizing the mouth of the tube before and after.
Why glasswares are wrapped with paper?
Glasswares are wrapped with paper before autoclave. After autoclave the glassware is taken to laminar flow hood in sterilized conditions where it is unwrapped. So wrapping is done to avoide contamination during taking the glassware from autocalave to laminar flow hood.
How do you use a comma to separate a phrase or clause that comes before the main parts?
if the main or most important part is before the main parts you use a comma, but if it is after then no comma
What is the most important thing to remem ber to do before going to work?
Employees should keep their personal life separate from their work life.
How autoclave works in gas law?
An autoclave is a device-absolutely essential for all tattoo and piercing studios without exceptions-that sterilizes tools and jewelry through a process of heated and pressurized steam. Usually this means 274 degrees at 18 PSI, although different autoclaves will use different methods. While some people may substitute a pressure cooker for an autoclave, a pressure cooker is not properly gauged, and its moisture may damage the integrity of the autoclaving bags. This is not to say that proper sterilization does not occur, only that the cycle should be run longer than required and a spore test be taken and passed monthly to insure this. Bags allowed to dry, paper side up, will be no less structurally fine when dry than those sterilized in an autoclave. For all the trouble, it's better to just buy an autoclave-they only cost a few hundred dollars. There are several different "types" of autoclave; gravity displacement, positive pressure displacement, and negative pressure (vacuum) displacement: * The autoclave at your local tattoo or piercing studio (in the US) is most likely a gravity displacement autoclave, or type "N". This design of autoclave generally has a heating element fully or partially submerged in a pool of water in the bottom of the autoclave chamber, along with a fill hole that transfers water from a reservoir to the autoclave chamber. As the water in the pool is heated it begins to evaporate, forming steam. Steam is lighter then air, as the chamber fills with steam the majority of air in the chamber is pushed to the bottom of the chamber, and escapes via the fill hole which is connected to a temperature sensitive diaphragm that closes once it is sufficiently heated. Once the diaphragm closes pressure builds up inside the autoclave chamber. The benefit of this type of autoclave is it's simplicity, the drawback with gravity displacement autoclaves is they are only designed to function properly with solid unwrapped instruments, however there has been no indication that a gravity displacement autoclave, properly loaded with properly processed instruments is unsafe for use in the modification industry. * A positive pressure displacement autoclave improves on the design of a gravity displacement autoclave (see above) by creating the steam in a separate internal unit, sometimes called a "steam generator". Once the amount of steam needed to displace air in the chamber is produced a valve opens and a pressurized burst of steam enters the autoclave chamber, resulting in a higher percentage of air from the chamber being removed then with a gravity displacement autoclave, this decreases autoclave cycle times. Currently the most widely distributed and used if not the only positive pressure displacement autoclave is the Statim line of autoclaves. The drawbacks to positive pressure displacement autoclaves are the high initial cost, and the fact they generally have a smaller chamber. * Negative pressure, or vacuum displacement autoclaves, also known as type "S", have a separate internal "steam generator", as well as a vacuum pump. After the autoclave chamber is closed the vacuum pump removes all air form the chamber, and as above, steam is injected into the chamber. Negative pressure displacement autoclaves are able to attain some of the highest sterility assurance level or SAL. Negative displacement autoclaves generally have a forced filtered air drying system that allows the autoclave packages to be throughly dries before contacting any ambient air. The drawback back to negative pressure displacement autoclaves is the cost, and sometimes the size of these systems. * The last "type" of steam autoclave is type "B" for Big, and the name speaks for itself. These systems are more or less enlarged negative pressure displacement autoclaves (there are enormous gravity displacement autoclaves as well, but they are still type "N", and not usually used in the medical or modification industries). The steam generator for Type "B" autoclaves is usually a separate stand alone unit, and the autoclave chamber is sometimes large enough to physically enter. Due the large scale and astronomical price tag of these autoclaves they are rarely, if ever used in the modification industry.
Can you give me a sentence with the word separate in it?
My teacher told me to separate the books before i leave.
How do you make sure your new tongue bar is sterile?
Autoclave it. If you buy it from a piercing shop, they will probably autoclave it before they give it to you. If you buy it online, it could be autoclaved. Just read around the website and see if they do or not. My piercing is healed, so whenever I switch bars or get a new one, I wipe it own with alcohol and then with soap. If your piercing is pretty new and you're worried, check out your piercer's shop. Some places will autoclave your jewelry if you bring it in ( for like, $5). Hope this helps!
Are used band aids recyclable?
Ewe!! No! Things that are in contact with human body fluids, need to be sterilized before using them again. This process of sterilizing a band-aid, would destroy the band-aid.
