lime is added to sand and portland cement to make mortar plyable and workable, it also adds strength and slows set time. Also it adds Flexibility
The lime elastisizes the mix,giving it more body and making it easier to use.It also delays setting time slightly.
the lime water will turn cloudy
I have seen it done this way on small jobs.
lime mortar
In order to get the color lime you have to mix the colors green and white or you can mix turquoise, white, and a bright yellow. it will make a glowing bright lime
Soco and lime shots are made with Rose's lime or some other sweetened lime juice. 1.5oz soco and a splash of sweeetened lime juice a splash is less than 0.5oz a litre of soco is 33oz a fifth(750ml) is 25 oz so if you have a litre mix it with about 7-10oz sweetend lime juice if you have a fifth mix it with about 5-7oz sweetened lime juice
You get gray-lime.
For a lime green that resembles the outer skin of the lime fruit a mixture of 4 parts blue to 3 parts yellow should achieve the desired effect. If you are using this to paint a lime remember to add more blue in the shadows and more ye;;ow in the highlights. If you are trying to mix the bright "lime green" colour so popular in decorating you will need to adjust to the yellow side. (5parts yellow to 3 part blue and add white to lighten the tone)
It is usually best to add the correct mix of antifreeze and water (usually 50/50). In a situation where there is no antifreeze available, yes, add water, then check the coolant later to see if the mix is adequate, and adjust the mix if necessary.
Lime chloride
A cauldron heated by wood to render beef fat then add the alkali and water mix plus the salt and stir till solids form,
Carbon dioxide- it turns the lime water milky as calcium carbonate is precipitated.
lime is used to mix with mortar cement and also to cover cadavers