Want this question answered?
In an Experiment to determine the linear expansion of copper, a micrometer screw gauge is one of the apparatus used, and it's usually fixed at the end of the metal rod. Now the reason why the micrometer screw gauge should always be reset back from the end of the bar is to avoid the heating of the micrometer screw gauge which would expand it,hence giving inaccurate measurements when taking the change in length of the rod. Since the experiment is all about linear expansion,it involves heat also. This heat is the one that would heat the rod and after the heat would be uniformly conducted throughout the bar,it would also heat the micrometer screw gauge at the end. This is the reason why it should be reset back from the end of the rod(to avoid it's heating)
Calipers, of which there are many types, are used to measure thickness. The most common type is the Vernier Caliper.
As far as i know, the accuracy varies between 0.01 mm and 0.001 mm depending on the type of micrometer. The ones that measure to 0.001mm are the ones with vernier scales on the sleeve.
mafanta
The zero error in the vernier calipers and micrometer screw gauge when the O mark on the main scale is not in line with the pointer.
A "depth gauge micrometer" is used by engineers. A depth gauge micrometer is a precision instrument used to measure various depths of different items.
Yes, it is possible
A micrometer screw gauge is commonly known as a micrometer. This is a form of calipers used for measuring small dimensions. Screw gauge in extensively used in the engineering field for obtaining precision measurements. The article describes the principle and main parts of a basic micrometer screw gauge.
With a micrometer. Usually in terms of gauge, 22 ga steel is .0299 in thick, the actual thickness for different materials varies aluminum of the same gauge is somewhat thinner than steel, galvanized steel is a little thicker than plain steel of the same gauge. A micrometer is one way to measure it, there are gauge plates that have slots for each size.
In an Experiment to determine the linear expansion of copper, a micrometer screw gauge is one of the apparatus used, and it's usually fixed at the end of the metal rod. Now the reason why the micrometer screw gauge should always be reset back from the end of the bar is to avoid the heating of the micrometer screw gauge which would expand it,hence giving inaccurate measurements when taking the change in length of the rod. Since the experiment is all about linear expansion,it involves heat also. This heat is the one that would heat the rod and after the heat would be uniformly conducted throughout the bar,it would also heat the micrometer screw gauge at the end. This is the reason why it should be reset back from the end of the rod(to avoid it's heating)
Calipers, of which there are many types, are used to measure thickness. The most common type is the Vernier Caliper.
With a Valve Spring Height Micrometer ----------------------------------------------------------------- If you don't have one of these tools you can also use what is called a snap gauge. Snap gauges are spring loaded and you can use it to measure the distance from the spring pad to the bottom of the retainer. Then you can measure the end to end distance of the snap gauge with either a dial caliper or a micrometer. Not as fast as the first solution but it is all we had for many years.
As far as i know, the accuracy varies between 0.01 mm and 0.001 mm depending on the type of micrometer. The ones that measure to 0.001mm are the ones with vernier scales on the sleeve.
A micrometer is not a unit of measurement. It is a gauge one uses to measure in either millimeters or thousandths of an inch.
mafanta
A micrometer (or micrometer screw gauge) measures the volume of a screw.
The zero error in the vernier calipers and micrometer screw gauge when the O mark on the main scale is not in line with the pointer.