It is necessary because if the engine is still on, it will use up the petrol you are filling up.
Improper Engine Tuning in Petrol Engine.
Park the car on a level surface. Drain the oil and change the filter. Pour in 4 quarts of the correct weight oil and then start the engine. Let it run for 1 minute and shut off. Wait 30 minutes and check the oil level. Add as necessary to fill to the full mark. You now know the capacity.Park the car on a level surface. Drain the oil and change the filter. Pour in 4 quarts of the correct weight oil and then start the engine. Let it run for 1 minute and shut off. Wait 30 minutes and check the oil level. Add as necessary to fill to the full mark. You now know the capacity.
Your question is confusing. Are you asking why the governor is not working or are you asking why is there not a governor on a petrol engine. Modern fuel injected engines are governed by the ECU which will shut off the fuel supply when the vehicle reaches a predetermined speed. Some older vehicle with a carburetor had a mechanical governor but most had no governor at all.
Park the vehicle on a level surface. Drain the oil and change the filter. Add 4 quarts of the correct weight oil. Start the engine and let run for 1 minute. Shut down, wait 30 minutes, and check the oil level. Add as necessary to reach the full mark on the dipstick. You now know the capacity.
Park your vehicle on a level surface. Drain the oil and change the oil filter. Add 4 quarts of the correct weight oil and start the engine. Run for 30 seconds and shut down. Wait 30 minutes and then check the oil level. Add as necessary to reach the full mark. You now know the capacity. Do not overfill.
Park the vehicle on a level surface. Drain the oil and change the filter. Pour in 5 quarts of oil, and start the engine. Run for 30 seconds and shut down. Wait 30 minutes and check the oil level. Add as necessary to fill it to the full mark. Do Not Overfill. You now know the capacity.
The fuel is shut off to shut the engine off.
At least 4.5 quarts. Drain the oil and install a new filter. Start with adding 4.5 and then after starting the engine and running for 1 minute, shut it off, wait 45 minutes and add oil to fill it up if necessary. You will then know the capacity. It takes 6 quarts of oil per the owners manual.
Park the vehicle on a level surface. Drain the oil and replace the filter. Pour in 4.5 quarts of the correct weight oil. Start the engine and let run for 1 minute. Shut engine off and wait 30 minutes. Check the oil level and add as necessary to fill to the full mark on the dipstick. You now know the capacity.
Park the vehicle on a level surface. Drain the oil and change the filter. Add 4.5 quarts of oil and start the engine. Run for 1 minute, shut down, wait 30 minutes and check the oil level. Add as necessary to fill to the full mark. You now know the capacity.
No that is not necessary
Viper Car Alarms will also shut the engine down.