Resistance in a wire restricts the movement of the electrons through the wire. This restriction transfers some of the energy contained in the electrons into the material of the wire and as this energy accumulates in the material of the wire the wire starts to heat. Therefore, there the energy that is transferred into the wire material is considered wasted because it is not available as electrical energy, which means the consumer who is using that wire is charge for the electrical energy that is waste. It the resistance is less in that conductor the consumer will save money.
The cause of resistance is the opposition to the flow of charges.Resistance occurs due to the collisions between charges inside a substance. The resistivity of a wire can be found out by using a meter bridge or a slide wire bridge.
You don't specify what you are referring to. However, if your question relates to resistance in general, then you should know that resistance is directly-proportional to the length of a conductor and to its resistivity, and inversely-proportional to its cross-sectional area. Resistivity is a characteristic of the material from which a conductor is made, and varies from one material to another.This means that you can increase resistance by increasing the length of a conductor, or by decreasing its cross-sectional area, or by selecting a conductor manufactured from a material with a greater resistivity (e.g. by using aluminium rather than, say, copper).
A wire with some resistance and a voltage applied to it The amount of current I passing this wire is V/R
If you are asking if a hot wire has a greater resistance than a cold wire then the answer I would say is yes. Cold wires have always had less resistance than hot wires
You go to the NEC and look at the chart for developed length and the ambient temperature and the load factor and if it solid or stranded wire as stranded allows for more voltage
since it is a good conductor
Short wire has less resistance Long wire has more resistance Thick wire has less resistance Thin wire has more resistance
The cause of resistance is the opposition to the flow of charges.Resistance occurs due to the collisions between charges inside a substance. The resistivity of a wire can be found out by using a meter bridge or a slide wire bridge.
A wire with low resistance. To obtain the lowest resistance, the wire must be -- thick -- a good conductor; silver, copper, etc. -- cold
Area of cross section: Resistance R is inversely proportional to the area of cross section ( A) of the conductor. This means R will decrease with increase in the area of conductor and vice versa. More area of conductor facilitates the flow of electric current through more area and thus decreases the resistance. This is the cause that thick copper wire creates less resistance to the electric current.
A thicker wire has less resistance than a thinner wire.
A thicker wire has less resistance than a thinner wire.
Heater coil is made of alloys such as meganin wire ,and is having high melting point .Alloys have high resistance due to which most of electrical energy is converted into heat energy.According to joules law of heating heat produced in a conductor is directly propotional to square of current and is directly proptional to resistance of conductor and time for which current flows.Heater wire does not glow because of having less resistance
Double the length is double the resistance. Resistance of a wire is the resistivity of the material, times the length, divided by the cross-section area.
If the wire's cross-section area is constant, then its resistance per unit length is constant, and the total resistance should be directly proportional to the length of a wire segment.
A wire that is thicker than another wire of the same material has less resistance
Resistance of a wire is inversely proportional to the square of its radius.