To make it run.
Oil lubricates the moving parts in an internal combustion engine, and helps in cooling the parts. Without oil, the engine would "run tight" effectually welding or melting the engine parts together.
No you can not use gas engine oil in diesel engine oil because processing of diesel engine is different from gas engine oil. If you use this then it damage your vehicles.
rm 80 is a two stroke engine and the oil is mixed with the gas.. 50:1 is a pretty good ratio for that small engine.. the transmission uses separate oil
A gas only engine has a spout where oil is added to the engine. If there is no spout, then it is a gas/oil engine. FYI - gas only engine is a four-stroke (four-cycle) engine and the gas/oil engine is two-stroke (two-cycle).
Anything other than the required fluids needed to run an engine (gas, oil, coolant) can seriously damage any engine.
A four cycle engine does not use a gas/oil mixture. The oil is in the crankcase and the gas goes in the gas tank. If you put oil in the gas on a 4 cycle engine it will run poorly and smoke a lot.
According to the 2003 Ford F-250 owners manual : For the 5.4 liter V8 and the 6.8 liter V10 gas engines : With engine oil filter change : ( 5.7 liters / 6.0 quarts of engine oil )
if you want to get a job in oil and gas sector, you needed to have a bachelor's degree in particular field or you should have completed specialization course in oil and gas course like diploma in oil and gas engineering
The recommended oil to use for mixing with gas in a two-stroke engine is two-stroke engine oil.
Oil is just as important to a diesel engine as it is to a petrol engine
Look on the oil container and the engine that you want to use it in. The engine will tell you what ratio to mix the oil and gas at. The container of oil will tell you what amount of gas should be mixed with it. I have found that the best way is to put the oil into an approved gas can and then add the gas to it. This helps to mix the oil better.
No, nor could oil in the gas.
If it is a 4-cycle engine you definitely need motor oil. If its a 2-cycle engine then the oil is mixed with the gas. If its a reel mower then no oil is needed except for external lubrication. Depending on the engine manufacturer the 4-cycle engines will require either SAE30 or 10w30 motor oil.