check your coil make it is firing both cylinders alternate plug wires to see if opposite cyl is firing if so is a safe bet that coil is the problem
if a cylinder is not firing there will be no spark at the spark plug. Carefully twist as you pull the ignition wire out and start the engine. when the wire gets close to the spark plug you should see an arc. This means the cylinder is firing
The firing order should be 1-5-3-6-2-4.
The firing order should be 1-5-3-6-2-4.
The firing order should be 1-5-3-6-2-4.
The firing order should be 1-5-3-6-2-4.
Look on the intake there should be a firing order on that. being a four cylinder the order probaly is 1,3,4,2
No firing order it has DIS The OE coils should be labled which wire goes to which cylinder
The firing order should be 1-5-3-6-2-4.
It should be printed on your intake manifold.
It should be stamped on the intake manifold.
Engine Should Be A 3 Cylinder 1.0 With The Firing Order Stamped In The Manifold. 1-3-2 Counter Clockwise Rotation On Distributor.
The firing order should be 1-6-5-4-3-2.