When it is cut from the tree it starts out 2 x 4". During the drying and planing process its size is reduced.
3/4" x 2 1/2"
3/4 x 3 1/2
3/4 x 1 1/2"
4
it is 4 centimertes
The motor size of most chainsaws are approximately 2 cc. There are, however, different size motors that range from 2 cc to 4 cc.
4*8
The moon is 1/4 the diameter of the Earth
1 3/4" x 12. Generally, the length is accurate, but the width rarely is.
EMT is electrical metallic tubing. In the electrical trade there are nominal sizes expressed as a standard size. To answer your question you must state the conduit size in either electrical terms or in standard size terms to get a conversion size.For example standard size 1/2" EMT has an actual diameter size of 3/4" and the 1/2"EMT connector for the 1/2" EMT conduit needs a 7/8" hole.Likewise with 3/4" EMT the actual outside diameter is 15/16" and the 3/4" EMT connector needs a 1-1/8" hole.
There are different sizes when framing lumber. The most common size of framing lumber is 2 by 4.
It would depend on the size of the drawing. If it's drawing height is 2 cm, the actual height would be 2*2ft = 4 ft tall. If the drawing height was 3 cm, the actual height would be 3*2ft = 6 ft tall.