Want this question answered?
Attenuation refer to the inter mixing of the waves having different frequencies and also known as noise.
6 dB is a "good" attenuation.
Wavelength and frequency.(But the product of the [ wavelength x frequency ] of any color is always the same number.)
We can reduce attenuation effects bt using repeaters
breast attenuation correction meethods
Because the attenuation of the fiber is much less at those wavelengths.
When an optical signal of a given wavelength travels in the fiber it looses power. The amount of loss of power per Km length of fiber is called its attenuation. A=10*LOG10(POUT/PIN) dB/Km Where POuT is optical power after 1 Km PIN is th epower launched in the Fiber.
When an optical signal of a given wavelength travels in the fiber it looses power. The amount of loss of power per Km length of fiber is called its attenuation. A=10*LOG10(POUT/PIN) dB/Km Where POuT is optical power after 1 Km PIN is th epower launched in the Fiber.
There are three types of attenuation in fibe optics cable. 1). Bending Losses 2). Scattering 3). Absorption
Because race car.
optical fiber
I size of the object is comparable to wavelength, it will cause error. In high frequency wavelength is very low. So small-small objects will also cause interference, thereby increasing attenuation. Waveguides are hollow metals. Thus wave does not go out and stay inside. Metals does not cause any attenuation. Propagation of EM wave in waveguide is similar to light in optical fiber.
If they are tunable, yes you can. If the operating frequency is locked, no, you cannot.
"UPC" its attenuation is smaller than the PC and it has a spherical cross-section
WDM (wavelength division multiplexing)
This is because infrared can travel farther with less distortion, i.e., it has less attenuation.
WDM wavelength division multiplexing