Want this question answered?
re-string it with hard mesh.
The difference between the three are as follows: Mesh backing: is a fabric mesh that is applied to the back of glass mosaics. This is commonly done on glass tile that is not transparent (not able to see through). This is important because after you install your glass tile on the wall or counter top, you do not want to see the mesh backing after installation. Paper Faced: this is when you have a transparent glass that you can see through, most manufacturers are applying a paper face on the FRONT of the glass tile. After you install the tile and the adhesives dries, you wet down the paper facing with a sponge. Let the water penetrate for about 15 minutes and the paper facing will peel right off. Clean any excess glue film from the paper face and finish by grouting. The only downfall to paper face is you cannot see the tiles through the paper face. MAKE SURE you have the right tile before installation! Film Faced: This is similar to the paper face only slightly better. Film faced is a clear facing that allows you to see the tiles, and pulls off a lot easier. The film facing is more like a sticker over the tile. It is much easier to pull off the film facing after installation.
the mesh that is used on a goalie stick
Hessian
Monster Mesh and Hard Mesh. Do not use soft mesh cause it can rip easily.
the strings that hold the mesh to the side walls of the stick
I wouldn't recommend it. I can work if you've got a really soft mesh but you should probably stick to RIT dye.
no, as far as you are not taping the mesh
Go to a sports store and by a mesh kit. IN the mesh kit should be directions on how to string a stick
It has a metal mesh to reflect the microwaves back into the microwave oven instead of out.
One thing you shouldn't do if you like a soft mesh, DON'T WET IT!!!!!!
You use nylon strings called sidewall and tie knots and loops to string the mesh into the head.