because its a mopar. j/k most likely because main operating systems ie brakes, steering column, cruise control wiring, gauge cluster, so on is on the other side.
simply get a different wiring harness from the junk yard
Yes the steering columns are BUT it looks different and you may need to change the wiring harness and it depends if there the same year?
Wiring runs all over the vehicle.
Yes and no. As long as the motor is the same, the harness should be the same.
A 318 (5.2L V8) will fit with a different trans, computer and wiring harness.
It may be the "clockspring" which is a wiring harness in the steering wheel that allows the the steering wheel to turn without the wires getting all tangled up
no they do not have the same wiring harness 65;
It really depends on which wiring harness. If you are asking about the whole cars wiring I would seriously take it to a shop. Other harnesses may be easy, like the radio harness, and door switch harnesses are the easy ones.
30x 10.5
Not sure what you mean by sequence. The harness does have a proper routing location and it must be plugged into the proper locations.
maybe not free but cheap at the junk yard
Yes, but you will also need the wiring harness and ecm.