answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why is there a charge port on shock top handles?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the refrigerant charge port on your Renault megane?

You can find the refrigerant charge port on top of the air conditioner compressor. The refrigerant charge port will be labeled as the low pressure port.


Where to charge the ac on a 1999 Pontiac Grand Prix gt?

The port is located on the firewall, top/center.


Where is the low side port for ac recharge for 2000 Daewoo Lanos hatchback?

The low side fill port is directly below the air cleaner rubber hose by the right shock tower. The high side fitting is on top of the right shock tower along the edge of the fender.


Where is low side charge port located on 1998 mountaineer?

Its on top of the accumulator/drier. You can get a drawing of this from the website link below. Just follow the "Find Your Cars Low Side Port" icon.


How do you replace rear shock absorbers on a 2004 Nissan Altima?

1) Jack the car and secure with jack stands. 2) Remove the tire. 3) Remove the two nuts that are on the top of the shock. This secures a plate that holds the top of the shock. 4) Remove the bolt on the bottom of the shock. Note: one side of the bolt is welded to the shock and does not have to be held. Removing this bolt is challenging. 5) Compress the the shock to remove. 6) Transfer plate and rubber sleeve to new shock. When removing the top nut on shock, secure the very top of the shock with vise grips. 7) Make sure to remove device that keeps the shock compressed. 8) Compress shock to reinstall. Install top plate to align with bolts. As the shock is decompressing, use screw driver to hold in position to insert bolt on the bottom of shock. 9) Install nuts on top of the shock and tighten. 10) Install bolt on the bottom of shock and tighten.


Where air conditioner recharge port 2000 Ford Expedition?

You are looking for the "low side" port. It will located on top of the engine along the refrigerant lines somewhere. There will be two of these ports. They should have either a plastic or rubber little cap covering them. Pull of this cap then connect the charge can nozzle to it. There is a low port and also a high side port. The charge can line only fits on the low side port. The high side is a different size and will not fit the charge kit. Fill until it is in the green area or around 35 psi usually. It is simple. Good luck. no it is not its under the truck


What cabinet handles offer warranties?

Top Knobs hardware offers a full lifetime warranty on their knobs, drawer pulls and handles. The warranty is offered to the original purchaser of the handles.


What direction should the pan handles be facing?

to the right on top of the stove


What are the top 5 busiest ports in the world?

port of shanghai port of singapore port of rotterdam port of hong kong port of new york


What is the charge on the top of a cloud in a thunderstorm?

The top of a cloud has a positive charge or protons


What is the part on the top of a mtb shock called?

The crown


Can people make fun of muffin top and love handles please?

hahahhahahaha what?