Want this question answered?
Is a parallel circuit whit 2 or more wires
Wires with less cross sectional area are easier to bend and curve around in a circuit. Also, copper costs money, so the more cross-section, then more copper and the cost of building the circuit goes up. Weight savings would be another factor. The maximum expected current load of a section of circuit is calculated, and the size wiring, necessary to handle that current is used.
it trens off
Something that contains a voltage circuit and wires.
You can't characterize a circuit type in this way. In a digital circuit a ribbon cable with parallel wires usually indicates a parallel connection as opposed to a serial connection or interface.
• In a parallel circuit, there are junctions in the circuit so the current can flow around the circuit in more than one way. • In a series circuit the current decreases as more bulbs are added. •In a parallel circuit, as more bulbs are added, the current increases. • This is because bulbs added in parallel offer less resistance
The correct name is a Short Circuit.
1 cheapness due to less use of wiring more copper =more cost2 it makes the wiring system simple due to less use of wires its not having to run everything back to the batteryless wires
In order to make a circuit, you need a power pack, connecting wires (2 or more) and a load. The load can be something like a lightbulb or any form of a resistor.
The component with the highest resistance in a series circuit will have, or "drop" the most voltage across it. All of the components in a series circuit will have the same amount of current flowing through them but not the same voltage drops if the resistances are different. More resistance more voltage across it, less resistance, less voltage across it.
Miniature circuit breakers are smaller & easier to instal. It occupy less space & are more efficient
Think of this as two scenarios. First, we have one blub, one battery, and two wires in a closed circuit, and the bulb lights up. Next, think about what would happen if we added a couple more wires to the circuit. The bulb would still light up, just as brightly, meaning that the new wires are not increasing the amount of resistance. This means that the wires are not slowing down the flow of charges.